RC1608F71R5CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608F71R5CS is a 71.5 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format with 0.1W power rating. This component is classified as Active product status with moisture-resistant construction and ROHS3 compliance. Equivalent and substitute parts are identified when identical electrical specifications, mechanical dimensions, and environmental ratings are maintained across alternative manufacturers. This reference provides engineering-grade substitution options for procurement flexibility, supply chain continuity, and design standardization.

Key Parameters

Parameter	Value	Unit
Resistance	71.5	Ohms
Tolerance	±1%	-
Power Rating	0.1	W (1/10W)
Package / Case	0603 (1608 Metric)	-
Composition	Thick Film	-
Temperature Coefficient	±100	ppm/°C
Operating Temperature Range	-55 to 155	°C
Moisture Sensitivity Level	1 (Unlimited)	-
RoHS Status	ROHS3 Compliant	-
Number of Terminations	2	-

Substitute Part Grouping Explanation

Substitution eligibility for the RC1608F71R5CS is determined by strict equivalence across the following critical parameters:

Electrical Specifications: Resistance value (71.5 Ohms), tolerance (±1%), and power rating (0.1W) must be identical. Temperature coefficient (±100ppm/°C) and operating temperature range (-55°C to 155°C) must match or exceed the original specification.

Mechanical Specifications: Package designation (0603 / 1608 Metric), physical dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm), and number of terminations (2) must be equivalent to ensure PCB footprint compatibility.

Environmental & Compliance: Moisture Sensitivity Level (MSL 1), RoHS3 compliance, and REACH status must be maintained. Composition (Thick Film) must remain consistent.

Packaging Format: Substitutes are grouped by packaging type (Tape & Reel or Cut Tape) but remain electrically and mechanically interchangeable at the component level.

Parts listed as "Direct," "Upgrade," or "Similar" indicate manufacturer alternatives with identical core specifications. Automotive-rated variants (AEC-Q200) represent enhanced reliability options suitable for automotive and high-reliability applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance (Ohms)	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op Temp (°C)	Composition	MSL	RoHS	Features	Product Status
RC1608F71R5CS	Samsung Electro-Mechanics	71.5	±1%	0.1	0603	±100	-55 to 155	Thick Film	1	ROHS3	Moisture Resistant	Active
CR0603-FX-71R5ELF	Bourns Inc.	71.5	±1%	0.1	0603	±100	-55 to 155	Thick Film	1	ROHS3	Moisture Resistant	Active
RC0603FR-0771R5L	YAGEO	71.5	±1%	0.1	0603	±100	-55 to 155	Thick Film	1	ROHS3	Moisture Resistant	Active
MCR03ERTF71R5	Rohm Semiconductor	71.5	±1%	0.1	0603	±100	-55 to 155	Thick Film	1	ROHS3	-	Discontinued at DiGi Electronics
CRCW060371R5FKEA	Vishay Dale	71.5	±1%	0.1	0603	±100	-55 to 155	Thick Film	1	ROHS3	Automotive AEC-Q200	Active
ERJ-3EKF71R5V	Panasonic Electronic Components	71.5	±1%	0.1	0603	±100	-55 to 155	Thick Film	1	ROHS3	Automotive AEC-Q200	Active
RMCF0603FT71R5	Stackpole Electronics Inc	71.5	±1%	0.1	0603	±100	-55 to 155	Thick Film	1	ROHS3	Automotive AEC-Q200	Active

Engineering Selection Recommendations

Primary Substitutes (Active Status, Standard Grade):

CR0603-FX-71R5ELF (Bourns Inc.) and RC0603FR-0771R5L (YAGEO) are direct equivalents with Active product status and identical electrical and mechanical specifications. Both maintain moisture-resistant construction and ROHS3 compliance. Selection between these options is based on packaging preference (Tape & Reel versus Cut Tape & Digi-Reel) and supply chain availability.

Automotive-Grade Alternatives (Active Status, AEC-Q200 Rated):

CRCW060371R5FKEA (Vishay Dale), ERJ-3EKF71R5V (Panasonic Electronic Components), and RMCF0603FT71R5 (Stackpole Electronics Inc) are functionally equivalent with enhanced automotive qualification (AEC-Q200). These components are suitable for applications requiring automotive-grade reliability and are recommended for automotive, industrial, and high-reliability environments. All three maintain identical electrical specifications and ROHS3 compliance.

Discontinued Component:

MCR03ERTF71R5 (Rohm Semiconductor) is listed as Discontinued at DiGi Electronics. While electrically and mechanically equivalent, this part should not be selected for new designs or long-term supply requirements.

Selection Criteria:

For standard industrial applications, CR0603-FX-71R5ELF or RC0603FR-0771R5L provide cost-effective equivalence. For automotive or mission-critical applications, CRCW060371R5FKEA, ERJ-3EKF71R5V, or RMCF0603FT71R5 are recommended due to AEC-Q200 qualification. All Active-status parts maintain identical compliance certifications (ROHS3, REACH Unaffected, EAR99).

Frequently Asked Questions (FAQ)

Q: Can I use CRCW060371R5FKEA as a direct replacement for RC1608F71R5CS?

A: Yes. CRCW060371R5FKEA is electrically and mechanically equivalent with identical resistance (71.5 Ohms), tolerance (±1%), power rating (0.1W), package (0603), temperature coefficient (±100ppm/°C), and operating range (-55°C to 155°C). The primary difference is AEC-Q200 automotive qualification, which represents enhanced reliability. Physical dimensions are within acceptable tolerance (1.55mm x 0.85mm versus 1.60mm x 0.80mm).

Q: What is the difference between the standard and automotive-grade versions?

A: Automotive-grade parts (CRCW060371R5FKEA, ERJ-3EKF71R5V, RMCF0603FT71R5) carry AEC-Q200 qualification, indicating compliance with automotive reliability and environmental stress testing standards. Electrical and mechanical specifications remain identical to standard-grade equivalents. Automotive-grade components are recommended for applications requiring enhanced reliability documentation and traceability.

Q: Are all substitute parts available in the same packaging formats?

A: No. CR0603-FX-71R5ELF is supplied in Tape & Reel (TR) format. RC0603FR-0771R5L is supplied in Cut Tape (CT) & Digi-Reel format. CRCW060371R5FKEA, ERJ-3EKF71R5V, and RMCF0603FT71R5 are supplied in Tape & Reel (TR) format. Packaging format selection depends on assembly equipment compatibility and procurement requirements. All formats are electrically and mechanically interchangeable at the component level.

Q: Why is MCR03ERTF71R5 listed if it is discontinued?

A: MCR03ERTF71R5 is included for reference purposes to document historical equivalence and supply chain alternatives. This part should not be selected for new designs or applications requiring long-term component availability. Active-status alternatives are recommended instead.

Q: Do all substitute parts meet ROHS3 and REACH compliance?

A: Yes. All listed substitute parts maintain ROHS3 compliance and REACH Unaffected status, matching the original RC1608F71R5CS specification. Moisture Sensitivity Level (MSL 1 - Unlimited) is consistent across all options.

Q: Can I mix different manufacturers in the same PCB assembly?

A: Yes. All substitute parts are electrically and mechanically equivalent and can be used interchangeably on the same PCB. However, design documentation should specify the approved part number or establish a qualified parts list to maintain traceability and consistency across production batches.

Q: What is the significance of the temperature coefficient specification?

A: The ±100ppm/°C temperature coefficient indicates the resistor's resistance change per degree Celsius within the operating range (-55°C to 155°C). All listed parts maintain identical temperature coefficient, ensuring equivalent performance across temperature extremes. This specification is critical for precision analog circuits and temperature-sensitive applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message