RC1608F1470CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608F1470CS is a 147 Ohms ±1% 0.1W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format. This component is classified as Active product status and is designed for general-purpose applications requiring moisture-resistant thick film construction. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits alternative qualified manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

RC1608F1470CS

Samsung Electro-MechanicsIn Stock: 670RC1608F1470CS Datasheet

Current PartRFQ

RC0603FR-07147RL

YAGEOIn Stock: 600931RC0603FR-07147RL Datasheet

DirectRFQ

AC0603FR-07147RL

YAGEOIn Stock: 10664AC0603FR-07147RL Datasheet

SimilarRFQ

CRCW0603147RFKEA

Vishay DaleIn Stock: 18138CRCW0603147RFKEA Datasheet

SimilarRFQ

ERJ-3EKF1470V

Panasonic Electronic ComponentsIn Stock: 98636ERJ-3EKF1470V Datasheet

SimilarRFQ

RMCF0603FT147R

Stackpole Electronics IncIn Stock: 18771RMCF0603FT147R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC1608F1470CS is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match Exactly):

• Resistance value: 147 Ohms
• Tolerance: ±1%
• Power rating: 0.1W (1/10W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

• Package type: 0603 (1608 Metric)
• Number of terminations: 2
• Composition: Thick Film

Compliance Parameters (Must Match or Exceed):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

All identified substitute parts meet these criteria. Substitute parts are further categorized by packaging format (Tape & Reel vs. Cut Tape) and optional automotive qualification (AEC-Q200), which do not affect electrical or mechanical compatibility but may influence procurement and application suitability.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts are Active product status and maintain full electrical and mechanical compatibility with the RC1608F1470CS. Selection among substitute parts should be based on the following factors:

Packaging Format Compatibility: RC0603FR-07147RL (YAGEO) is supplied in Cut Tape (CT) & Digi-Reel® format, which differs from the standard Tape & Reel (TR) packaging of the main part. This may require process adjustment in automated assembly environments.

Automotive Qualification: AC0603FR-07147RL (YAGEO), CRCW0603147RFKEA (Vishay Dale), ERJ-3EKF1470V (Panasonic), and RMCF0603FT147R (Stackpole) carry AEC-Q200 automotive qualification. These parts are suitable for applications requiring automotive-grade reliability standards. Non-automotive applications may use any substitute without qualification penalty.

Inventory Availability: All substitute parts are listed as New Original In Stock with varying quantities. RC0603FR-07147RL (YAGEO) offers the highest inventory level at 600,847 pieces.

Compliance Status: All substitute parts maintain ROHS3 compliance, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring regulatory and environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can RC0603FR-07147RL replace RC1608F1470CS in production assembly?

A: Yes. RC0603FR-07147RL is electrically and mechanically equivalent. The primary difference is packaging format (Cut Tape & Digi-Reel® versus Tape & Reel). Verify that your pick-and-place equipment supports the alternative packaging format before implementation.

Q: What is the difference between automotive-qualified and non-automotive substitute parts?

A: Automotive-qualified parts (AC0603FR-07147RL, CRCW0603147RFKEA, ERJ-3EKF1470V, RMCF0603FT147R) meet AEC-Q200 standards for automotive applications. Non-automotive parts (RC0603FR-07147RL) do not carry this qualification. For non-automotive applications, both types are electrically and mechanically equivalent. For automotive applications, use only AEC-Q200 qualified parts.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant and REACH unaffected, matching the compliance status of the main part RC1608F1470CS.

Q: Do substitute parts have the same physical dimensions?

A: All substitute parts use the 0603 (1608 Metric) package. Minor dimensional variations exist within tolerance: CRCW0603147RFKEA has dimensions of 0.061" L x 0.033" W (1.55mm x 0.85mm) and height 0.020" (0.50mm), while other parts are 0.063" L x 0.031" W (1.60mm x 0.80mm) with height 0.022" (0.55mm). These variations remain within standard 0603 package specifications and do not affect PCB layout or assembly compatibility.

Q: Can I mix different manufacturers' parts in the same production batch?

A: Yes. All substitute parts meet identical electrical specifications (147 Ohms ±1%, 0.1W, ±100ppm/°C, -55°C ~ 155°C) and mechanical requirements (0603 package, 2 terminations, thick film). Mixing manufacturers is electrically and mechanically valid. Document manufacturer part numbers in bill of materials for traceability.

Q: What is Moisture Sensitivity Level (MSL) 1?

A: MSL 1 indicates unlimited shelf life without moisture bake-out requirements. All listed parts, including the main part and substitutes, have MSL 1 rating, eliminating moisture-related handling constraints.