RC1608F131CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608F131CS is a 130 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format with 0.1W power rating. This component is classified as Active product status and is RoHS3 compliant with moisture sensitivity level 1 (unlimited). The part is widely used in general-purpose electronic applications requiring precision resistive elements with moisture resistance characteristics. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct functional interchangeability in circuit designs.

Substiute Parts

RC1608F131CS

Samsung Electro-MechanicsIn Stock: 758RC1608F131CS Datasheet

Current PartRFQ

CR0603-FX-1300ELF

Bourns Inc.In Stock: 58904CR0603-FX-1300ELF Datasheet

DirectRFQ

RC0603FR-07130RL

YAGEOIn Stock: 1323885RC0603FR-07130RL Datasheet

DirectRFQ

AC0603FR-07130RL

YAGEOIn Stock: 25469AC0603FR-07130RL Datasheet

SimilarRFQ

CRCW0603130RFKEA

Vishay DaleIn Stock: 39364CRCW0603130RFKEA Datasheet

SimilarRFQ

CRCW0603130RFKTA

Vishay DaleIn Stock: 12973CRCW0603130RFKTA Datasheet

SimilarRFQ

ERJ-3EKF1300V

Panasonic Electronic ComponentsIn Stock: 32683ERJ-3EKF1300V Datasheet

SimilarRFQ

RMCF0603FT130R

Stackpole Electronics IncIn Stock: 727480RMCF0603FT130R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC1608F131CS is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value: 130 Ohms (exact match)
• Tolerance: ±1% (exact match)
• Power rating: 0.1W / 1/10W (exact match)
• Temperature coefficient: ±100ppm/°C (exact match)
• Operating temperature range: -55°C ~ 155°C (exact match)

Mechanical Equivalence Requirements:

• Package type: 0603 (1608 Metric) (exact match)
• Composition: Thick Film (exact match)
• Number of terminations: 2 (exact match)
• Moisture resistance: Required feature

Compliance Requirements:

• RoHS3 compliance status
• Moisture Sensitivity Level 1 (Unlimited)
• REACH status alignment

All substitute parts listed below meet these core electrical and mechanical parameters. Variations in packaging format (Cut Tape vs. Tape & Reel), physical dimensions within tolerance, and automotive certifications (AEC-Q200) are noted but do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Recommended for Standard Applications):

The following parts are direct functional equivalents with full RoHS3 compliance and matching electrical/mechanical specifications:

• CR0603-FX-1300ELF (Bourns Inc.) – Direct substitute with Tape & Reel packaging; 58,798 units in stock
• RC0603FR-07130RL (YAGEO) – Direct substitute with highest inventory availability (1,323,865 units); available in Cut Tape and Digi-Reel formats
• CRCW0603130RFKEA (Vishay Dale) – Direct substitute with RoHS3 compliance; 39,297 units in stock
• ERJ-3EKF1300V (Panasonic Electronic Components) – Direct substitute with RoHS3 compliance; 32,582 units in stock
• RMCF0603FT130R (Stackpole Electronics Inc) – Direct substitute with highest Tape & Reel inventory (727,382 units); RoHS3 compliant

Automotive-Qualified Alternatives:

Parts with AEC-Q200 automotive qualification are functionally equivalent for general-purpose applications but carry additional automotive-grade certifications:

• AC0603FR-07130RL (YAGEO) – AEC-Q200 rated; 25,448 units in stock
• CRCW0603130RFKEA (Vishay Dale) – AEC-Q200 rated; 39,297 units in stock
• CRCW0603130RFKTA (Vishay Dale) – AEC-Q200 rated; RoHS non-compliant; 12,940 units in stock
• ERJ-3EKF1300V (Panasonic Electronic Components) – AEC-Q200 rated; 32,582 units in stock
• RMCF0603FT130R (Stackpole Electronics Inc) – AEC-Q200 rated; 727,382 units in stock

Compliance Consideration:

CRCW0603130RFKTA is RoHS non-compliant and REACH affected. This part is not suitable for applications requiring RoHS3 compliance or REACH compliance verification.

Packaging Format Selection:

• Cut Tape (CT): RC1608F131CS (Samsung), RC0603FR-07130RL (YAGEO) – suitable for manual assembly or small-volume production
• Tape & Reel (TR): CR0603-FX-1300ELF (Bourns), CRCW0603130RFKEA (Vishay Dale), ERJ-3EKF1300V (Panasonic), RMCF0603FT130R (Stackpole), AC0603FR-07130RL (YAGEO) – suitable for automated assembly and high-volume production

Frequently Asked Questions (FAQ)

Q: Can I substitute RC1608F131CS with any of the listed parts without circuit redesign?

A: Yes. All listed parts except CRCW0603130RFKTA are direct functional equivalents with identical electrical specifications (130 Ω ±1%, 0.1W, ±100ppm/°C, -55°C ~ 155°C) and mechanical compatibility (0603 package, 2 terminations, thick film composition). CRCW0603130RFKTA is excluded due to RoHS non-compliance.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) packaging is suitable for manual assembly, prototyping, and low-volume production runs. Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment and high-volume manufacturing. Both formats contain identical components; the difference is in delivery and handling format only.

Q: Are automotive-qualified parts (AEC-Q200) suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification indicates additional testing and quality assurance beyond standard specifications. These parts meet or exceed the electrical and mechanical requirements of the RC1608F131CS and are fully compatible with non-automotive applications.

Q: Why is CRCW0603130RFKTA listed if it is not RoHS3 compliant?

A: CRCW0603130RFKTA is included for reference and historical compatibility purposes. It is electrically and mechanically equivalent but does not meet current RoHS3 compliance requirements. Use only if your application explicitly permits RoHS non-compliant components.

Q: What does Moisture Sensitivity Level 1 (Unlimited) mean?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions. The part does not require special moisture-controlled storage or handling procedures and can be stored under standard warehouse conditions indefinitely.

Q: Can I mix different manufacturers' parts in the same circuit board?

A: Yes. All listed substitute parts are electrically and mechanically equivalent. Mixing manufacturers on the same board is acceptable from a functional standpoint. However, for production consistency and traceability, single-source procurement is often preferred.

Q: What is the significance of Temperature Coefficient ±100ppm/°C?

A: Temperature coefficient specifies how much the resistance value changes with temperature. ±100ppm/°C means the resistance can drift up to 0.01% per degree Celsius across the operating range (-55°C ~ 155°C). All listed parts share this specification, ensuring equivalent thermal performance.

Q: Are there any physical dimension differences between substitute parts?

A: Minor dimensional variations exist within tolerance. Most parts are 0.063" L x 0.031" W (1.60mm x 0.80mm). CRCW0603130RFKEA and CRCW0603130RFKTA are 0.061" L x 0.033" W (1.55mm x 0.85mm). RMCF0603FT130R is 0.061" L x 0.031" W (1.55mm x 0.80mm). These variations are within standard 0603 package tolerances and do not affect PCB footprint compatibility.

Q: Which substitute part has the highest inventory availability?

A: RC0603FR-07130RL (YAGEO) has the highest inventory with 1,323,865 units in stock, followed by RMCF0603FT130R (Stackpole Electronics Inc) with 727,382 units.