RC1608F130CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608F130CS is a 13 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.1W (1/10W) power dissipation in a 0603 (1608 Metric) surface mount package. This component is classified as Active product status with moisture resistant characteristics and unlimited moisture sensitivity level (MSL 1). The part is ROHS3 compliant and REACH unaffected, suitable for general industrial and consumer applications requiring standard precision resistors. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and packaging compatibility to ensure direct circuit board replacement capability.

Key Parameters

Parameter	Specification
Resistance Value	13 Ohms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitute parts for the RC1608F130CS are qualified based on the following critical parameters that determine functional and mechanical interchangeability:

Electrical Parameters (Must Match):

Resistance value: 13 Ohms
Tolerance: ±1%
Power rating: 0.1W (1/10W)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C

Mechanical Parameters (Must Match):

Package type: 0603 (1608 Metric)
Number of terminations: 2
Composition: Thick Film

Compliance Parameters (Must Match):

RoHS3 compliance
REACH unaffected status
Moisture sensitivity level: 1 (Unlimited)

Substitute parts are grouped into two categories:

Direct Substitutes (Identical Specifications): RC0603FR-0713RL (YAGEO) matches all electrical, mechanical, and compliance parameters with identical dimensions and packaging format.

Qualified Substitutes (Equivalent Performance with Enhanced Features): AC0603FR-0713RL, CRCW060313R0FKEA, ERJ-3EKF13R0V, and RMCF0603FT13R0 meet all core electrical and mechanical requirements while incorporating automotive AEC-Q200 qualification. These parts are suitable for applications where automotive-grade reliability is beneficial or required.

Discontinued Substitute (Historical Reference): MCR03ERTF13R0 (Rohm Semiconductor) is discontinued at DiGi Electronics but remains electrically and mechanically equivalent for legacy system support.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Composition	MSL	RoHS	AEC-Q200	Product Status
RC1608F130CS	Samsung Electro-Mechanics	13 Ω	±1%	0.1	0603	±100ppm/°C	-55 to 155°C	Thick Film	1	ROHS3	No	Active
RC0603FR-0713RL	YAGEO	13 Ω	±1%	0.1	0603	±100ppm/°C	-55 to 155°C	Thick Film	1	ROHS3	No	Active
MCR03ERTF13R0	Rohm Semiconductor	13 Ω	±1%	0.1	0603	±100ppm/°C	-55 to 155°C	Thick Film	1	ROHS3	No	Discontinued
AC0603FR-0713RL	YAGEO	13 Ω	±1%	0.1	0603	±100ppm/°C	-55 to 155°C	Thick Film	1	ROHS3	Yes	Active
CRCW060313R0FKEA	Vishay Dale	13 Ω	±1%	0.1	0603	±100ppm/°C	-55 to 155°C	Thick Film	1	ROHS3	Yes	Active
ERJ-3EKF13R0V	Panasonic Electronic Components	13 Ω	±1%	0.1	0603	±100ppm/°C	-55 to 155°C	Thick Film	1	ROHS3	Yes	Active
RMCF0603FT13R0	Stackpole Electronics Inc	13 Ω	±1%	0.1	0603	±100ppm/°C	-55 to 155°C	Thick Film	1	ROHS3	Yes	Active

Engineering Selection Recommendations

Primary Selection (Direct Equivalent): RC0603FR-0713RL (YAGEO) is the recommended direct substitute for RC1608F130CS. This part maintains identical electrical specifications, mechanical dimensions, and compliance certifications while offering higher inventory availability (10,400 units in stock versus 997 units for the original part). Both parts are Active status with standard industrial-grade specifications.

Secondary Selection (Enhanced Reliability): For applications requiring automotive-grade qualification, AC0603FR-0713RL, CRCW060313R0FKEA, ERJ-3EKF13R0V, or RMCF0603FT13R0 are suitable alternatives. These parts meet all electrical and mechanical requirements of the RC1608F130CS while incorporating AEC-Q200 automotive qualification. Selection among these four options should be based on inventory availability and supply chain preferences:

CRCW060313R0FKEA (Vishay Dale): 32,582 units in stock
ERJ-3EKF13R0V (Panasonic): 73,966 units in stock
RMCF0603FT13R0 (Stackpole): 20,091 units in stock
AC0603FR-0713RL (YAGEO): 5,854 units in stock

Discontinued Part (Legacy Support Only): MCR03ERTF13R0 (Rohm Semiconductor) is discontinued at DiGi Electronics and should not be selected for new designs. This part remains electrically and mechanically equivalent but is retained in this reference for legacy system maintenance only.

All substitute parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility with the original RC1608F130CS specification.

Frequently Asked Questions (FAQ)

Q: Can RC0603FR-0713RL directly replace RC1608F130CS without circuit modification?

A: Yes. RC0603FR-0713RL is a direct equivalent with identical resistance value (13 Ohms), tolerance (±1%), power rating (0.1W), package format (0603), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). No circuit modifications are required for substitution.

Q: What is the difference between the standard RC1608F130CS and the AEC-Q200 qualified alternatives?

A: The RC1608F130CS is a standard industrial-grade resistor. The AEC-Q200 qualified alternatives (AC0603FR-0713RL, CRCW060313R0FKEA, ERJ-3EKF13R0V, RMCF0603FT13R0) meet automotive industry reliability standards. All parts share identical electrical specifications and 0603 package format. AEC-Q200 qualification is beneficial for automotive applications but not required for general industrial use.

Q: Are there packaging format differences between substitute parts?

A: All substitute parts use the 0603 (1608 Metric) package format. However, packaging delivery format differs: RC1608F130CS and RC0603FR-0713RL are supplied in Tape & Reel (TR) format, while MCR03ERTF13R0 uses Cut Tape (CT) & Digi-Reel®, and AC0603FR-0713RL uses Cut Tape (CT) & Digi-Reel®. CRCW060313R0FKEA, ERJ-3EKF13R0V, and RMCF0603FT13R0 are supplied in Tape & Reel (TR) format. Verify packaging format compatibility with your assembly process requirements.

Q: Why is MCR03ERTF13R0 listed if it is discontinued?

A: MCR03ERTF13R0 is included as a historical reference for legacy system maintenance and repair. This part is electrically and mechanically equivalent to RC1608F130CS but is discontinued at DiGi Electronics. For new designs, select from active status alternatives.

Q: What is the significance of MSL 1 (Unlimited) moisture sensitivity level?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. Both RC1608F130CS and all substitute parts carry MSL 1 classification, meaning they do not require special moisture control during storage or handling. This simplifies supply chain management and assembly processes.

Q: Can I use automotive-grade parts in non-automotive applications?

A: Yes. Automotive-grade parts (AEC-Q200 qualified) meet or exceed industrial-grade specifications. Using AEC-Q200 qualified parts in non-automotive applications provides enhanced reliability margins without circuit compatibility issues. Selection should be based on inventory availability and cost considerations.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. RC1608F130CS and all listed substitute parts are ROHS3 compliant and REACH unaffected. This ensures regulatory compliance for both industrial and consumer applications across all major markets.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message