RC1210FR-07232RL Equivalent & Substitute Parts

Part Overview

The RC1210FR-07232RL is a 232 Ohm ±1% 0.5W thick film chip resistor in 1210 (3225 Metric) package manufactured by YAGEO. This component is classified as Active product status and is currently in stock with 849 pieces available. The part is moisture resistant and suitable for general-purpose applications requiring precision resistive elements in compact surface-mount form factors.

Substitute parts become necessary when the primary manufacturer experiences supply constraints, when design requirements mandate specific certifications such as automotive qualification, or when alternative sourcing improves cost efficiency while maintaining electrical and mechanical compatibility.

Substiute Parts

RC1210FR-07232RL

YAGEOIn Stock: 925RC1210FR-07232RL Datasheet

Current PartRFQ

ERJ-14NF2320U

Panasonic Electronic ComponentsIn Stock: 10630ERJ-14NF2320U Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC1210FR-07232RL is determined by strict alignment with the following electrical and mechanical parameters:

• Resistance value: 232 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.5W minimum
• Package: 1210 (3225 Metric) form factor
• Composition: Thick film construction
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C minimum
• Moisture sensitivity: MSL 1 or equivalent
• RoHS compliance: ROHS3 or equivalent

The ERJ-14NF2320U from Panasonic Electronic Components meets all substitution criteria. This part maintains identical electrical specifications while adding automotive AEC-Q200 qualification. The physical dimensions show minor variations within acceptable tolerances for 1210 package specifications.

Parameter Comparison

Engineering Selection Recommendations

The RC1210FR-07232RL remains the primary selection for general-purpose applications where YAGEO sourcing is available and cost optimization is the priority. The part's Active product status and current inventory of 849 pieces support immediate procurement.

The ERJ-14NF2320U serves as the qualified substitute when automotive-grade reliability is required. The AEC-Q200 certification indicates this part has undergone automotive qualification testing and is suitable for automotive and high-reliability applications. However, this part carries a "Not For New Designs" status from Panasonic, indicating it is maintained for legacy support only. Selection of this substitute should be limited to applications requiring automotive qualification or when RC1210FR-07232RL availability is constrained.

Both parts maintain identical electrical performance and are mechanically compatible within standard PCB assembly tolerances for 1210 package components.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14NF2320U be used as a direct replacement for RC1210FR-07232RL?

A: Yes. Both parts share identical resistance (232 Ohms), tolerance (±1%), power rating (0.5W), package (1210), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). Physical dimensions vary within acceptable 1210 package tolerances.

Q: What is the significance of the "Not For New Designs" status on ERJ-14NF2320U?

A: This designation indicates Panasonic maintains the part for existing applications but does not recommend it for new product development. Use this part only when legacy compatibility is required or when automotive AEC-Q200 qualification is mandatory.

Q: Are there dimensional differences between these parts?

A: Minor dimensional variations exist. RC1210FR-07232RL measures 3.10mm × 2.60mm × 0.60mm (max height), while ERJ-14NF2320U measures 3.20mm × 2.50mm × 0.70mm (max height). These variations fall within standard 1210 package specifications and do not affect PCB assembly compatibility.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. Both RC1210FR-07232RL and ERJ-14NF2320U are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings.

Q: When should automotive AEC-Q200 qualification be considered?

A: AEC-Q200 qualification is required for automotive applications, industrial equipment operating in harsh environments, or systems where automotive-grade reliability standards are specified. The ERJ-14NF2320U provides this certification; the RC1210FR-07232RL does not.