RC1005J471CS Equivalent & Substitute Parts

Part Overview

The RC1005J471CS is a 470 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0402 (1005 Metric) package format. This surface mount device is rated for 0.063W (1/16W) power dissipation with moisture resistant construction and operates across the temperature range of -55°C to 155°C. The part is Active status and ROHS3 compliant with MSL 1 rating. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility while accounting for tolerance and power rating variations.

Key Parameters

Parameter	Value
Resistance	470 Ohms
Tolerance	±5%
Power Rating	0.063W (1/16W)
Package / Case	0402 (1005 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the RC1005J471CS are classified into two categories based on electrical parameter compatibility:

Direct Equivalent (Same Tolerance): Parts maintaining ±5% tolerance with identical 0.063W power rating, 0402 package, and thick film composition. These parts are functionally interchangeable without circuit performance impact.

Upgrade Substitutes (Improved Tolerance): Parts with ±1% tolerance offering tighter resistance accuracy. These include variants with enhanced power ratings (0.1W) or automotive AEC-Q200 qualification. Upgrade substitutes maintain the same 0402 package and operating temperature range.

Similar Parts (Automotive Qualified): Parts with ±5% tolerance matching the original specification but featuring automotive AEC-Q200 certification for applications requiring enhanced reliability standards.

The key parameters determining substitution eligibility are: resistance value (470 Ohms), package format (0402), operating temperature range (-55°C ~ 155°C), composition (thick film), and MSL rating (1). Tolerance and power rating variations are permitted when circuit design allows.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	RoHS	MSL
RC1005J471CS	Samsung Electro-Mechanics	470 Ω	±5%	0.063	0402	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
RC0402JR-07470RL	YAGEO	470 Ω	±5%	0.063	0402	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
CRG0402F470R	TE Connectivity Passive Product	470 Ω	±1%	0.063	0402	±100ppm/°C	-55~155°C	—	ROHS3	1
ERJ-2RKF4700X	Panasonic Electronic Components	470 Ω	±1%	0.1	0402	±100ppm/°C	-55~155°C	Automotive AEC-Q200	ROHS3	1
RC0402FR-07470RL	YAGEO	470 Ω	±1%	0.063	0402	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
RMCF0402FT470R	Stackpole Electronics Inc	470 Ω	±1%	0.063	0402	±100ppm/°C	-55~155°C	Automotive AEC-Q200	ROHS3	1
AC0402JR-07470RL	YAGEO	470 Ω	±5%	0.063	0402	±100ppm/°C	-55~155°C	Automotive AEC-Q200, Moisture Resistant	ROHS3	1
RMCF0402JT470R	Stackpole Electronics Inc	470 Ω	±5%	0.063	0402	±100ppm/°C	-55~155°C	Automotive AEC-Q200	ROHS3	1

Engineering Selection Recommendations

Direct Equivalent Selection: RC0402JR-07470RL (YAGEO) serves as the primary direct equivalent, maintaining identical electrical specifications (470 Ω ±5%, 0.063W) and moisture resistant construction. Both parts are Active status with ROHS3 compliance and MSL 1 rating. This part is suitable for direct replacement in existing designs without circuit re-evaluation.

Upgrade Substitute Selection for Tolerance-Critical Applications: RC0402FR-07470RL (YAGEO) and CRG0402F470R (TE Connectivity) provide ±1% tolerance improvement over the original ±5% specification. Both maintain 0.063W power rating and 0402 package compatibility. Selection between these two depends on packaging preference (Cut Tape vs. Tape & Reel) and supplier availability.

Upgrade Substitute Selection for Automotive Applications: RMCF0402FT470R (Stackpole Electronics) and ERJ-2RKF4700X (Panasonic) both feature AEC-Q200 automotive qualification with ±1% tolerance. ERJ-2RKF4700X offers increased power rating (0.1W) for applications requiring additional thermal margin. RMCF0402FT470R maintains the original 0.063W rating.

Similar Part Selection for Automotive Non-Critical Applications: AC0402JR-07470RL and RMCF0402JT470R both maintain ±5% tolerance with AEC-Q200 qualification, suitable for automotive applications where tolerance upgrade is not required.

All substitute parts are Active status, ROHS3 compliant, and operate within the -55°C to 155°C temperature range matching the original specification.

Frequently Asked Questions (FAQ)

Q: Can RC0402JR-07470RL be used as a direct replacement for RC1005J471CS?

A: Yes. RC0402JR-07470RL is a direct equivalent with matching 470 Ω ±5% resistance, 0.063W power rating, 0402 package, and moisture resistant thick film construction. Both parts are ROHS3 compliant with MSL 1 rating and identical operating temperature range.

Q: What is the difference between the original part and the ±1% tolerance upgrades?

A: The original RC1005J471CS has ±5% tolerance, while upgrade substitutes (RC0402FR-07470RL, CRG0402F470R, RMCF0402FT470R, ERJ-2RKF4700X) provide ±1% tolerance. This tighter tolerance reduces resistance variation and improves circuit accuracy. All other electrical and mechanical parameters remain compatible.

Q: Are automotive AEC-Q200 qualified parts interchangeable with non-automotive parts?

A: AEC-Q200 qualified parts (RMCF0402FT470R, ERJ-2RKF4700X, AC0402JR-07470RL, RMCF0402JT470R) meet enhanced reliability and qualification standards required for automotive applications. These parts are functionally compatible with non-automotive designs but are not required unless automotive qualification is specified.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake-out requirements. All listed substitute parts carry MSL 1 rating, ensuring consistent handling and storage procedures across all options.

Q: Does package format differ between substitute parts?

A: All substitute parts use the 0402 (1005 Metric) package with identical dimensions (0.039" L x 0.020" W, 1.00mm x 0.50mm). Packaging format varies between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel, which affects supply and handling but not electrical or mechanical compatibility.

Q: Can ERJ-2RKF4700X be used in place of the original part despite higher power rating?

A: Yes. ERJ-2RKF4700X has 0.1W power rating compared to the original 0.063W. Higher power rating provides additional thermal margin and is fully compatible. The 0402 package dimensions, resistance value, tolerance, and operating temperature range match the original specification.

Q: What factors should determine substitute part selection?

A: Selection depends on: (1) tolerance requirement (±5% or ±1%), (2) automotive qualification necessity (AEC-Q200), (3) power rating margin requirements, (4) packaging format preference (Tape & Reel vs. Cut Tape), and (5) supplier availability and lead time.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message