RC1005F160CS Equivalent & Substitute Parts Reference

Part Overview

The RC1005F160CS is a 16 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0402 (1005 Metric) package format with 1/16W power rating. This component is classified as Active product status and is designed for general-purpose SMD applications requiring moisture-resistant construction. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design requirements necessitate alternative manufacturer sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

RC1005F160CS

Samsung Electro-MechanicsIn Stock: 1081RC1005F160CS Datasheet

Current PartRFQ

CR0402-FX-16R0GLF

Bourns Inc.In Stock: 20601CR0402-FX-16R0GLF Datasheet

DirectRFQ

RC0402FR-0716RL

YAGEOIn Stock: 241390RC0402FR-0716RL Datasheet

DirectRFQ

ERJ-2RKF16R0X

Panasonic Electronic ComponentsIn Stock: 95138ERJ-2RKF16R0X Datasheet

UpgradeRFQ

CRCW040216R0FKED

Vishay DaleIn Stock: 22700CRCW040216R0FKED Datasheet

SimilarRFQ

RMCF0402FT16R0

Stackpole Electronics IncIn Stock: 20512RMCF0402FT16R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC1005F160CS are classified based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Critical Parameters (Must Match Exactly):

• Resistance value: 16 Ohms
• Tolerance: ±1%
• Package / Case: 0402 (1005 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Status: ROHS3 Compliant

Allowable Variation:

• Power Rating: 0.063W (1/16W) is standard; 0.1W (1/10W) represents an upgrade with higher power dissipation capability, suitable for applications where the original rating is marginal

Substitute Classification:

Direct Equivalents (Identical electrical and mechanical specifications):

• CR0402-FX-16R0GLF (Bourns Inc.)
• RC0402FR-0716RL (YAGEO)
• CRCW040216R0FKED (Vishay Dale)
• RMCF0402FT16R0 (Stackpole Electronics Inc)

Upgrade Equivalent (Higher power rating, same package and electrical parameters):

• ERJ-2RKF16R0X (Panasonic Electronic Components) — 0.1W rating

All substitute parts maintain identical physical dimensions (0.039" L x 0.020" W / 1.00mm x 0.50mm) and maximum seated height (0.016" / 0.40mm), ensuring PCB layout compatibility.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution (No Design Changes Required):

CR0402-FX-16R0GLF, RC0402FR-0716RL, CRCW040216R0FKED, and RMCF0402FT16R0 are electrically and mechanically equivalent to RC1005F160CS. All maintain identical resistance, tolerance, power rating, package dimensions, and operating specifications. Selection among these direct equivalents is based on supplier availability and inventory status.

For Upgraded Applications:

ERJ-2RKF16R0X provides a 0.1W power rating compared to the standard 0.063W, offering increased thermal margin in applications where power dissipation approaches component limits. This upgrade maintains all other electrical parameters and package compatibility. The Automotive AEC-Q200 qualification of ERJ-2RKF16R0X, CRCW040216R0FKED, and RMCF0402FT16R0 indicates suitability for automotive-grade applications requiring enhanced reliability standards.

Compliance Considerations:

All substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory status of the original RC1005F160CS. Moisture Sensitivity Level 1 (Unlimited) across all parts indicates no special moisture handling requirements during storage or assembly.

Frequently Asked Questions (FAQ)

Q: Can CR0402-FX-16R0GLF replace RC1005F160CS without PCB layout modifications?

A: Yes. CR0402-FX-16R0GLF is a direct electrical and mechanical equivalent. Physical dimensions (0.039" L x 0.020" W, maximum height 0.016") are identical, ensuring footprint compatibility without PCB redesign.

Q: What is the difference between the 0.063W and 0.1W power ratings?

A: The 0.063W (1/16W) rating is the standard for RC1005F160CS and most direct substitutes. The 0.1W (1/10W) rating of ERJ-2RKF16R0X provides higher power dissipation capability. Selection depends on circuit power requirements; the 0.1W component is suitable for applications where the original 0.063W rating is marginal or where thermal margin is desired.

Q: Are automotive-qualified parts (AEC-Q200) interchangeable with non-automotive versions?

A: Yes, from an electrical and mechanical standpoint. CRCW040216R0FKED, RMCF0402FT16R0, and ERJ-2RKF16R0X carry AEC-Q200 automotive qualification, indicating enhanced reliability testing and qualification. These parts are suitable for both automotive and general industrial applications. Non-automotive qualified parts (CR0402-FX-16R0GLF, RC0402FR-0716RL) are suitable for general-purpose applications.

Q: Does moisture resistance affect substitution compatibility?

A: No. RC1005F160CS and RC0402FR-0716RL both specify moisture-resistant construction. CR0402-FX-16R0GLF, CRCW040216R0FKED, RMCF0402FT16R0, and ERJ-2RKF16R0X do not specify this feature but all carry Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling requirements. This does not affect functional compatibility.

Q: Can these parts be used in high-temperature applications?

A: Yes. All substitute parts and the original RC1005F160CS operate across the identical temperature range of -55°C to 155°C with ±100ppm/°C temperature coefficient. Selection is not limited by temperature performance.

Q: What is the significance of ROHS3 compliance across all parts?

A: ROHS3 compliance indicates all parts meet Restriction of Hazardous Substances Directive requirements, confirming lead-free construction and absence of restricted substances. This regulatory alignment ensures compatibility in applications requiring ROHS compliance.