Equivalent & Substitute Parts for RC1005F1130CS

Part Overview

The RC1005F1130CS is a 113 Ohms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0402 (1005 Metric) package format. This component is rated at 0.063W (1/16W) power dissipation with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and carries ROHS3 compliance with MSL Level 1 rating, indicating unlimited moisture sensitivity protection. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring 113 Ohm resistive elements with identical or enhanced electrical and mechanical specifications.

Substiute Parts

RC1005F1130CS

Samsung Electro-MechanicsIn Stock: 729RC1005F1130CS Datasheet

Current PartRFQ

RC0402FR-07113RL

YAGEOIn Stock: 61948RC0402FR-07113RL Datasheet

DirectRFQ

ERJ-2RKF1130X

Panasonic Electronic ComponentsIn Stock: 70097ERJ-2RKF1130X Datasheet

UpgradeRFQ

CRCW0402113RFKED

Vishay DaleIn Stock: 37908CRCW0402113RFKED Datasheet

SimilarRFQ

RMCF0402FT113R

Stackpole Electronics IncIn Stock: 20187RMCF0402FT113R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC1005F1130CS is determined by strict equivalence across the following critical parameters: resistance value (113 Ohms), tolerance (±1%), package format (0402 / 1005 Metric), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, MSL Level 1). Power rating serves as a secondary criterion: parts rated at 0.063W (1/16W) are direct equivalents; parts rated at 0.1W (1/10W) or higher are classified as upgrades, providing enhanced thermal performance while maintaining full backward compatibility. All substitute parts listed are Active status components with identical mechanical dimensions (0.039" L x 0.020" W, 0.016" max height) and two-terminal configuration. Automotive AEC-Q200 certification, where present, indicates additional qualification for automotive applications but does not restrict use in general industrial or consumer applications.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (RC0402FR-07113RL - YAGEO): This part provides complete electrical and mechanical equivalence to the RC1005F1130CS. Both components share identical resistance, tolerance, power rating, package dimensions, and thermal specifications. Selection of the YAGEO RC0402FR-07113RL is appropriate for direct replacement in existing designs without circuit modification or re-qualification. ROHS3 compliance and MSL Level 1 rating ensure compatibility with standard manufacturing and storage protocols.

Upgrade Option (ERJ-2RKF1130X - Panasonic): The Panasonic ERJ-2RKF1130X offers enhanced power dissipation at 0.1W (1/10W) compared to the 0.063W rating of the main part. This upgrade maintains all other electrical parameters and package specifications while providing improved thermal margin. The AEC-Q200 automotive qualification extends application scope to automotive-grade circuits. This part is suitable for designs requiring higher reliability or thermal performance without physical footprint changes.

Similar Alternatives (CRCW0402113RFKED - Vishay Dale, RMCF0402FT113R - Stackpole): Both the Vishay Dale CRCW0402113RFKED and Stackpole RMCF0402FT113R provide direct electrical equivalence with identical power ratings and package specifications. Both carry AEC-Q200 automotive certification, indicating suitability for automotive and industrial applications. These parts are interchangeable with the RC1005F1130CS in standard applications and offer alternative sourcing options for supply chain management.

All substitute parts maintain Active product status, ensuring continued availability and manufacturing support. Selection among equivalent parts should be based on procurement availability, cost considerations, and specific application requirements for automotive qualification.

Frequently Asked Questions (FAQ)

Q: Can the RC0402FR-07113RL (YAGEO) be used as a direct replacement for RC1005F1130CS (Samsung)?

A: Yes. The RC0402FR-07113RL provides complete electrical and mechanical equivalence. Both parts share identical resistance (113 Ohms), tolerance (±1%), power rating (0.063W), package format (0402), temperature coefficient (±100ppm/°C), operating range (-55°C ~ 155°C), and compliance certifications (ROHS3, MSL Level 1). No circuit modification or re-qualification is required.

Q: What is the difference between the ERJ-2RKF1130X (Panasonic) and the main part RC1005F1130CS?

A: The primary difference is power rating. The ERJ-2RKF1130X is rated at 0.1W (1/10W) compared to 0.063W (1/16W) for the RC1005F1130CS. All other electrical parameters are identical. The Panasonic part also carries AEC-Q200 automotive certification. The higher power rating provides enhanced thermal performance and is suitable for applications requiring greater reliability margins.

Q: Are the CRCW0402113RFKED (Vishay Dale) and RMCF0402FT113R (Stackpole) interchangeable with RC1005F1130CS?

A: Yes. Both parts are electrically and mechanically equivalent to the RC1005F1130CS. All three share identical resistance, tolerance, power rating, package dimensions, and thermal specifications. The Vishay and Stackpole parts include AEC-Q200 automotive certification, which does not restrict their use in general applications but indicates additional qualification for automotive environments.

Q: Does the 0402 package dimension remain consistent across all substitute parts?

A: Yes. All substitute parts maintain the 0402 (1005 Metric) package format with identical dimensions: 0.039" length x 0.020" width and 0.016" maximum seated height. PCB footprints and assembly processes require no modification.

Q: What does MSL Level 1 rating mean for these resistors?

A: MSL (Moisture Sensitivity Level) Level 1 indicates unlimited shelf life without moisture bake-out requirements. These components can be stored and handled under standard warehouse conditions without special desiccant packaging or pre-reflow baking procedures.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification, meeting European Union Restriction of Hazardous Substances requirements. This ensures compatibility with modern manufacturing standards and environmental regulations.

Q: Can I use the higher power-rated ERJ-2RKF1130X in place of the 0.063W-rated RC1005F1130CS?

A: Yes. The 0.1W power rating of the ERJ-2RKF1130X is a superset of the 0.063W requirement. The part will operate safely in any circuit designed for the lower power rating, with improved thermal performance and reliability margin.