RC0603F2210CS Equivalent & Substitute Parts

Part Overview

The RC0603F2210CS is a 221 Ohms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.05W (1/20W) power dissipation in a 0201 (0603 Metric) surface mount package. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RC0603F2210CS

Samsung Electro-MechanicsIn Stock: 802RC0603F2210CS Datasheet

Current PartRFQ

CRCW0201221RFKED

Vishay DaleIn Stock: 23371CRCW0201221RFKED Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC0603F2210CS is determined by strict alignment of the following critical parameters:

Electrical Parameters (Must Match Exactly):

• Resistance value: 221 Ohms
• Tolerance: ±1%
• Power rating: 0.05W (1/20W)
• Composition: Thick Film

Mechanical Parameters (Must Match Exactly):

• Package designation: 0201 (0603 Metric)
• Physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm)
• Height seated maximum: 0.010" (0.26mm)
• Termination count: 2

Compliance Parameters (Must Match or Exceed):

• RoHS3 Compliant status
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

The CRCW0201221RFKED manufactured by Vishay Dale meets all mandatory electrical and mechanical criteria. Operating temperature range differences do not disqualify substitution when the application operates within the overlapping range (-55°C ~ 125°C).

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: RC0603F2210CS (Samsung Electro-Mechanics)

Use the original Samsung RC0603F2210CS when:

• Existing supply chain and procurement agreements specify Samsung components
• Design documentation explicitly requires Samsung Electro-Mechanics sourcing
• Current inventory (762 Pcs) meets project timeline requirements

Substitute Selection: CRCW0201221RFKED (Vishay Dale)

Use the Vishay Dale CRCW0201221RFKED when:

• Samsung RC0603F2210CS is unavailable or on extended lead time
• Supply chain diversification is required
• Extended operating temperature capability (-55°C ~ 155°C) provides design margin
• Superior temperature coefficient (±100ppm/°C vs ±250ppm/°C) improves circuit stability
• Higher inventory availability (23,352 Pcs) ensures procurement reliability

Both components satisfy identical electrical specifications, mechanical compatibility, and regulatory compliance requirements (RoHS3, REACH Unaffected, MSL 1). Direct substitution is permissible without circuit redesign or performance degradation when operating within the overlapping temperature range of -55°C to 125°C.

Frequently Asked Questions (FAQ)

Q: Can CRCW0201221RFKED replace RC0603F2210CS in existing designs?

A: Yes. Both components share identical resistance (221 Ohms), tolerance (±1%), power rating (0.05W), composition (thick film), and package dimensions (0201 / 0603 Metric). Electrical and mechanical compatibility is confirmed. Substitution requires no circuit modification.

Q: What is the difference in temperature coefficient between these parts?

A: The RC0603F2210CS has a temperature coefficient of ±250ppm/°C, while the CRCW0201221RFKED has ±100ppm/°C. The Vishay component exhibits superior temperature stability. This difference is relevant only in precision analog circuits operating across wide temperature ranges. For standard digital and general-purpose applications, both coefficients are acceptable.

Q: Are both parts RoHS3 compliant?

A: Yes. Both RC0603F2210CS and CRCW0201221RFKED are RoHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.

Q: What is the maximum operating temperature for each part?

A: RC0603F2210CS operates from -55°C to 125°C. CRCW0201221RFKED operates from -55°C to 155°C. When substituting, verify that the application's maximum operating temperature does not exceed 125°C to ensure both components function within specification.

Q: Do these components have different moisture sensitivity requirements?

A: No. Both components have Moisture Sensitivity Level (MSL) 1, classified as Unlimited. This means no special moisture control measures are required during storage, handling, or assembly. Standard component storage conditions apply to both parts.

Q: Can I mix RC0603F2210CS and CRCW0201221RFKED in the same production batch?

A: Yes. Both components are mechanically and electrically interchangeable. Mixed sourcing is permissible when supply constraints require component substitution. Ensure procurement documentation and bill of materials (BOM) clearly identify the approved substitute relationship for traceability.

Q: What packaging format is used for both parts?

A: Both components are supplied in Tape & Reel (TR) format, the standard packaging for automated surface mount assembly. Reel specifications and tape dimensions conform to 0201 package standards, ensuring compatibility with standard pick-and-place equipment.