RC0603F200CS Equivalent & Substitute Parts Reference

Part Overview

The RC0603F200CS is a 20 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.05W (1/20W) in a 0201 (0603 Metric) surface mount package. This component is currently active in production with 988 pieces available in stock. The part is moisture resistant and complies with RoHS3 and REACH standards, making it suitable for industrial and commercial applications requiring precision resistive elements in compact form factors.

Substitute parts are necessary when the primary manufacturer part becomes unavailable, when alternative packaging formats are required, or when supply chain optimization necessitates qualified alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

RC0603F200CS

Samsung Electro-MechanicsIn Stock: 1094RC0603F200CS Datasheet

Current PartRFQ

MCR006YRTF20R0

Rohm SemiconductorIn Stock: 13499MCR006YRTF20R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC0603F200CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 20 Ohms (exact match required)
• Tolerance: ±1% (precision class must be maintained)
• Power rating: 0.05W minimum (equal or higher acceptable)
• Package: 0201 (0603 Metric) form factor
• Composition: Thick Film technology
• Temperature coefficient: ±250ppm/°C
• Operating temperature range: -55°C ~ 125°C minimum
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The substitute part MCR006YRTF20R0 manufactured by Rohm Semiconductor meets all mandatory electrical and mechanical parameters. Packaging format differs (Cut Tape versus Tape & Reel), which affects logistics and handling but does not impact electrical performance or PCB assembly compatibility. Product status variation (Discontinued at DiGi Electronics for the substitute) is noted for supply chain planning purposes.

Parameter Comparison

Engineering Selection Recommendations

RC0603F200CS (Samsung Electro-Mechanics) - Primary Selection:

• Active product status ensures long-term availability and supply chain stability
• Tape & Reel packaging format optimized for automated assembly processes
• Current inventory of 988 pieces supports immediate procurement
• ROHS3 and REACH compliance confirmed for regulated applications
• Recommended for new designs and production runs requiring sustained component availability

MCR006YRTF20R0 (Rohm Semiconductor) - Qualified Substitute:

• Electrical and mechanical parameters are fully equivalent to the primary part
• Thick film composition and temperature coefficient ensure identical circuit performance
• 0201 package footprint provides direct PCB layout compatibility
• ROHS3 and REACH compliance maintained
• Cut Tape packaging suitable for manual assembly or lower-volume production
• Product discontinuation status at DiGi Electronics requires verification of alternative distribution channels before selection for new designs
• Acceptable for retrofit applications and component replacement in existing assemblies where supply of primary part is constrained

Selection Criteria:

• For new production designs: RC0603F200CS (active status, established supply)
• For component replacement or retrofit: MCR006YRTF20R0 (verified electrical equivalence)
• For high-volume automated assembly: RC0603F200CS (Tape & Reel format)
• For manual assembly or prototyping: Either part acceptable based on availability

Frequently Asked Questions (FAQ)

Q: Can MCR006YRTF20R0 be used as a direct replacement for RC0603F200CS on the same PCB?

A: Yes. Both parts are 0201 (0603 Metric) package with identical dimensions (0.024" L x 0.012" W, 0.60mm x 0.30mm) and maximum seated height (0.010" / 0.26mm). PCB footprints are mechanically and electrically compatible. No layout modifications are required.

Q: Are the electrical characteristics identical between these two parts?

A: Yes. Both parts have 20 Ohm resistance at ±1% tolerance, 0.05W power rating, ±250ppm/°C temperature coefficient, and -55°C ~ 125°C operating range. Circuit performance is equivalent.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on reels, optimized for automated pick-and-place assembly. Cut Tape (CT) packaging supplies components on tape segments, suitable for manual assembly or lower-volume production. Electrical performance is identical; packaging affects logistics and assembly process compatibility only.

Q: Does the product discontinuation status of MCR006YRTF20R0 affect its use as a substitute?

A: Discontinuation at DiGi Electronics indicates this distributor no longer stocks the part. However, the part may remain available through other authorized distributors or direct from Rohm Semiconductor. Verify current availability through alternative supply channels before committing to this substitute for production use. For new designs, RC0603F200CS is recommended due to active production status.

Q: Are both parts RoHS3 and REACH compliant?

A: Yes. Both RC0603F200CS and MCR006YRTF20R0 are ROHS3 Compliant and REACH Unaffected, meeting regulatory requirements for industrial and commercial applications.

Q: What is MSL 1 (Unlimited) and why does it matter?

A: MSL (Moisture Sensitivity Level) 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. Both parts carry this rating, eliminating moisture-related storage constraints.