RC0603F113CS Equivalent & Substitute Parts

Part Overview

The RC0603F113CS is an 11 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.05W (1/20W) in a 0201 (0603 Metric) surface mount package. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component's functional requirements in circuit applications.

Substiute Parts

RC0603F113CS

Samsung Electro-MechanicsIn Stock: 841RC0603F113CS Datasheet

Current PartRFQ

CRCW020111K0FKED

Vishay DaleIn Stock: 39392CRCW020111K0FKED Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RC0603F113CS is determined by strict equivalence across the following critical parameters:

Electrical Equivalence: Resistance value (11 kOhms), tolerance (±1%), and power rating (0.05W / 1/20W) must be identical. Composition type (Thick Film) must match.

Mechanical Equivalence: Package designation (0201 / 0603 Metric) and physical dimensions (0.024" L x 0.012" W / 0.60mm x 0.30mm) must be identical. Height seated maximum (0.010" / 0.26mm) and number of terminations (2) must match.

Compliance Equivalence: RoHS3 compliance status and Moisture Sensitivity Level (MSL 1) must be maintained. REACH and ECCN classifications must align.

Temperature Performance: Operating temperature range must support the original specification minimum of -55°C ~ 125°C.

The substitute part CRCW020111K0FKED from Vishay Dale meets all these criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The CRCW020111K0FKED (Vishay Dale) is a direct functional equivalent to the RC0603F113CS (Samsung Electro-Mechanics). Both components maintain Active product status and full RoHS3 compliance. The substitute part demonstrates an extended operating temperature range (-55°C ~ 155°C versus -55°C ~ 125°C), which provides additional thermal margin without compromising circuit performance. All electrical specifications, mechanical dimensions, and regulatory certifications are equivalent. Selection between these parts may be based on availability, packaging format (Cut Tape versus Tape & Reel), or supply chain requirements, as both components satisfy identical functional and compliance criteria.

Frequently Asked Questions (FAQ)

Q: Can CRCW020111K0FKED replace RC0603F113CS in all applications?

A: Yes. Both components are electrically and mechanically equivalent with identical resistance (11 kOhms), tolerance (±1%), power rating (0.05W), package (0201), and compliance certifications (RoHS3, REACH Unaffected, EAR99). The substitute part's extended temperature range (-55°C ~ 155°C) is compatible with the original specification range.

Q: What is the difference in packaging between these parts?

A: The RC0603F113CS is supplied in Cut Tape (CT) format, while the CRCW020111K0FKED is supplied in Tape & Reel (TR) format. Both formats contain identical components; packaging format selection depends on assembly process requirements and order quantities.

Q: Are there any temperature performance differences?

A: The CRCW020111K0FKED operates across -55°C ~ 155°C, exceeding the RC0603F113CS range of -55°C ~ 125°C. This extended range does not create incompatibility; the substitute part functions within the original specification range and beyond.

Q: Do both parts meet the same compliance standards?

A: Yes. Both components are RoHS3 compliant, REACH Unaffected, classified as EAR99, and share the same HTSUS code (8533.21.0030). Moisture Sensitivity Level is identical (MSL 1 - Unlimited) for both parts.

Q: What determines substitution eligibility for 0201 chip resistors?

A: Substitution is determined by matching resistance value, tolerance, power rating, composition type, package designation, physical dimensions, operating temperature range compatibility, and regulatory compliance status. All these parameters must align between the original and substitute component.