RC0402F201CS Equivalent & Substitute Parts

Part Overview

The RC0402F201CS is a 200 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 01005 (0402 Metric) package format. This component is rated for 0.03W (1/32W) power dissipation and is designed for moisture-resistant applications across industrial and consumer electronics. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1), making it suitable for high-reliability applications. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct functional interchangeability in circuit designs.

Substiute Parts

RC0402F201CS

Samsung Electro-MechanicsIn Stock: 964RC0402F201CS Datasheet

Current PartRFQ

CRCW0100200RFREL

Vishay DaleIn Stock: 61615CRCW0100200RFREL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC0402F201CS are identified through strict alignment of the following critical parameters:

Electrical Specifications: Resistance value (200 Ohms), tolerance (±1%), and power rating (0.03W / 1/32W) must be identical. Temperature coefficient (±250ppm/°C) and operating temperature range (-55°C ~ 125°C) establish thermal performance equivalence.

Mechanical Compatibility: Package type (01005 / 0402 Metric), physical dimensions (0.016" L x 0.008" W / 0.40mm x 0.20mm), and maximum seated height (0.006" / 0.15mm) ensure PCB layout and assembly compatibility without design modification.

Environmental & Compliance Requirements: RoHS3 compliance, MSL 1 rating, and REACH unaffected status confirm regulatory equivalence for end-use applications.

Composition & Construction: Thick film construction type ensures consistent performance characteristics and reliability profiles across substitute selections.

The CRCW0100200RFREL from Vishay Dale meets all specified parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The CRCW0100200RFREL from Vishay Dale is a direct functional equivalent to the RC0402F201CS. Both components share identical electrical ratings, mechanical dimensions, and environmental compliance certifications. Selection between these parts is based on availability, supply chain considerations, and procurement requirements rather than technical performance differences.

Both parts maintain Active product status and full RoHS3 compliance with MSL 1 rating, confirming suitability for applications requiring unlimited moisture exposure without special handling. The identical temperature coefficient and operating temperature range ensure consistent performance across the specified thermal envelope.

Substitution is valid for all circuit applications where the RC0402F201CS is specified, provided that component sourcing and inventory management align with procurement timelines.

Frequently Asked Questions (FAQ)

Q: Can the CRCW0100200RFREL replace the RC0402F201CS in existing designs?

A: Yes. Both components are electrically and mechanically identical with matching 200 Ohm ±1% specifications, 0.03W power rating, 01005 package dimensions, and operating temperature range of -55°C ~ 125°C. Direct substitution is valid without circuit modification.

Q: Are there differences in tolerance or temperature coefficient between these parts?

A: No. Both the RC0402F201CS and CRCW0100200RFREL specify ±1% tolerance and ±250ppm/°C temperature coefficient, ensuring equivalent performance stability across the operating temperature range.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both components are ROHS3 compliant, REACH unaffected, and rated MSL 1 (unlimited moisture sensitivity). Regulatory and environmental compliance is identical.

Q: Are the physical dimensions identical for PCB assembly?

A: Yes. Both parts are packaged in 01005 (0402 Metric) format with dimensions of 0.016" L x 0.008" W (0.40mm x 0.20mm) and maximum seated height of 0.006" (0.15mm). PCB footprints and assembly processes are interchangeable.

Q: What is the basis for substitution between these two manufacturers?

A: Substitution is based on matching electrical specifications (resistance, tolerance, power rating, temperature coefficient), identical mechanical packaging (01005 / 0402 Metric), and equivalent environmental ratings (RoHS3, MSL 1, REACH status). These parameters define functional interchangeability for the 200 Ohm thick film chip resistor category.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both the RC0402F201CS and CRCW0100200RFREL are supplied in Tape & Reel (TR) format, ensuring compatibility with automated assembly equipment and standard component handling processes.