RC0201FR-0716R2L Equivalent & Substitute Parts

Part Overview

The RC0201FR-0716R2L is a 16.2 Ohm ±1% thick film chip resistor manufactured by YAGEO in the 0201 (0603 Metric) package format. This component is rated for 0.05W (1/20W) power dissipation and is designed for moisture-resistant applications across industrial and consumer electronics. The part maintains active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings are maintained across alternative manufacturers.

Substiute Parts

RC0201FR-0716R2L

YAGEOIn Stock: 10107RC0201FR-0716R2L Datasheet

Current PartRFQ

ERJ-1GNF16R2C

Panasonic Electronic ComponentsIn Stock: 30742ERJ-1GNF16R2C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC0201FR-0716R2L is determined by strict equivalence across the following parameters:

• Resistance value: 16.2 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.05W / 1/20W (exact match required)
• Package format: 0201 (0603 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±200ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 125°C (exact match required)
• Physical dimensions: 0.024" L x 0.012" W / 0.60mm x 0.30mm (exact match required)
• Height seated maximum: 0.010" / 0.26mm (exact match required)
• Regulatory compliance: RoHS3 Compliant, MSL 1 (exact match required)

The ERJ-1GNF16R2C manufactured by Panasonic Electronic Components meets all substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the RC0201FR-0716R2L and ERJ-1GNF16R2C maintain active product status with full regulatory compliance. Selection between these parts is based on availability, supply chain considerations, and procurement requirements rather than technical performance differentiation. Both components satisfy RoHS3 compliance requirements and REACH unaffected status. The identical electrical specifications, mechanical dimensions, temperature characteristics, and environmental ratings ensure functional interchangeability in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-1GNF16R2C be used as a direct replacement for RC0201FR-0716R2L?

A: Yes. Both parts are electrically and mechanically equivalent with identical resistance values (16.2 Ohms ±1%), power ratings (0.05W), package dimensions (0201 / 0603 Metric), temperature coefficients (±200ppm/°C), and operating ranges (-55°C ~ 125°C). Regulatory compliance and moisture sensitivity levels are identical.

Q: Are there any package or footprint differences between these parts?

A: No. Both components use the 0201 (0603 Metric) package with identical physical dimensions of 0.024" L x 0.012" W (0.60mm x 0.30mm) and maximum seated height of 0.010" (0.26mm). PCB footprints are identical.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both RC0201FR-0716R2L and ERJ-1GNF16R2C are RoHS3 compliant, REACH unaffected, classified as EAR99, and carry HTSUS code 8533.21.0030. Moisture sensitivity level is MSL 1 (unlimited) for both parts.

Q: What determines substitution eligibility for 0201 chip resistors?

A: Substitution requires exact matching of resistance value, tolerance, power rating, package format, composition type, temperature coefficient, operating temperature range, physical dimensions, and regulatory compliance status. Deviation in any parameter disqualifies a part as a direct substitute.

Q: Are there inventory or lead time considerations when selecting between these manufacturers?

A: Inventory levels may vary by supplier and time period. The RC0201FR-0716R2L shows 10,040 pieces in stock, while ERJ-1GNF16R2C shows 30,697 pieces available. Lead times and availability should be confirmed with your component supplier.