RC0100JR-07910RL Equivalent & Substitute Parts

Part Overview

The RC0100JR-07910RL is a 910 Ohm ±5% chip resistor manufactured by YAGEO in the 01005 (0402 Metric) package format. This thick film, moisture-resistant component is rated at 0.03W (1/32W) power dissipation and operates across the temperature range of -55°C to 125°C. The part is currently in active production status with ROHS3 compliance and MSL Level 1 rating.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained while potentially offering improved specifications such as tighter tolerance ratings or enhanced availability.

Substiute Parts

RC0100JR-07910RL

YAGEOIn Stock: 852RC0100JR-07910RL Datasheet

Current PartRFQ

RC0100FR-07910RL

YAGEOIn Stock: 12287RC0100FR-07910RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC0100JR-07910RL is determined by the following critical parameters:

• Resistance Value: Must be 910 Ohms
• Package Format: Must be 01005 (0402 Metric) to ensure PCB footprint compatibility
• Power Rating: Must be 0.03W (1/32W) or higher
• Composition: Thick film construction
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C to 125°C minimum
• Compliance: ROHS3 and MSL Level 1 or better

The RC0100FR-07910RL qualifies as a direct substitute by meeting all mechanical and electrical requirements while offering improved tolerance specification (±1% versus ±5%).

Parameter Comparison

Engineering Selection Recommendations

The RC0100FR-07910RL serves as a direct substitute for the RC0100JR-07910RL with the advantage of tighter tolerance specification. Both parts maintain identical mechanical compatibility, thermal performance, and regulatory compliance. Selection between these parts should be based on circuit tolerance requirements and component availability. The RC0100FR-07910RL's ±1% tolerance provides improved accuracy for applications requiring tighter resistance values, while the RC0100JR-07910RL remains suitable for general-purpose applications tolerating ±5% variation.

Both parts are ROHS3 compliant and carry MSL Level 1 rating, indicating unlimited shelf life under standard storage conditions. No additional qualification or testing is required when substituting between these parts in equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can RC0100FR-07910RL replace RC0100JR-07910RL in any application?

A: Yes, the RC0100FR-07910RL is mechanically and electrically compatible as a direct substitute. The tighter tolerance specification (±1% versus ±5%) makes it suitable for all applications where the original part is used.

Q: What is the primary difference between these two parts?

A: The tolerance specification differs. RC0100JR-07910RL carries ±5% tolerance, while RC0100FR-07910RL carries ±1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are both parts available in the same package format?

A: Yes, both parts use the 01005 (0402 Metric) package format with identical physical dimensions: 0.016" L x 0.008" W (0.40mm x 0.20mm).

Q: Do these parts have the same temperature performance?

A: Yes, both parts share identical temperature coefficient (±200ppm/°C) and operating temperature range (-55°C to 125°C).

Q: Are there any compliance or regulatory differences?

A: No, both parts are ROHS3 compliant, REACH unaffected, and carry MSL Level 1 rating with unlimited shelf life.

Q: Which part should be selected for high-precision applications?

A: The RC0100FR-07910RL with ±1% tolerance is appropriate for applications requiring tighter resistance accuracy.