RC0100JR-07680RL Equivalent & Substitute Parts

Part Overview

The RC0100JR-07680RL is a 680 Ohm ±5% thick film chip resistor manufactured by YAGEO in the 01005 (0402 Metric) package format. This component is rated for 0.03W (1/32W) power dissipation and is designed for moisture-resistant applications across industrial and commercial temperature ranges. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when electrical specifications, package dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

RC0100JR-07680RL

YAGEOIn Stock: 887RC0100JR-07680RL Datasheet

Current PartRFQ

RC0100FR-07680RL

YAGEOIn Stock: 16230RC0100FR-07680RL Datasheet

UpgradeRFQ

ERJ-XGNJ681Y

Panasonic Electronic ComponentsIn Stock: 26329ERJ-XGNJ681Y Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC0100JR-07680RL are qualified based on the following criteria:

Electrical Parameters: Resistance value (680 Ohms), power rating (0.03W), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C ~ 125°C) must remain constant across all substitutes.

Package Compatibility: All substitute parts must use the 01005 (0402 Metric) package with identical physical dimensions (0.016" L x 0.008" W / 0.40mm x 0.20mm) and maximum seated height (0.006" / 0.15mm).

Compliance Requirements: RoHS3 compliance and MSL 1 rating are mandatory for all substitutes.

Tolerance Variations: Tolerance specifications may differ from the original ±5% rating. Tighter tolerance options (±1%) are classified as upgrades and remain functionally compatible within the same electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

RC0100FR-07680RL (YAGEO Upgrade): This part provides improved tolerance specification (±1% versus ±5%) while maintaining all electrical, mechanical, and compliance parameters identical to the main part. Selection is appropriate for applications requiring tighter resistance accuracy. Product status is Active with full RoHS3 and MSL 1 compliance.

ERJ-XGNJ681Y (Panasonic Direct Substitute): This part matches the original tolerance (±5%) and all critical electrical and mechanical specifications. Manufactured by Panasonic Electronic Components, it provides cross-manufacturer compatibility while maintaining Active product status and full RoHS3 and MSL 1 compliance.

All substitute parts are suitable for direct replacement in applications where the RC0100JR-07680RL is currently specified, provided that circuit design parameters do not require the specific tolerance or manufacturer designation of the original component.

Frequently Asked Questions (FAQ)

Q: Can RC0100FR-07680RL replace RC0100JR-07680RL in all applications?

A: Yes. RC0100FR-07680RL maintains identical electrical performance (680 Ohms, 0.03W, ±200ppm/°C, -55°C ~ 125°C), package dimensions (01005 / 0402 Metric), and compliance certifications (RoHS3, MSL 1). The tighter tolerance (±1% versus ±5%) represents an upgrade that does not restrict compatibility.

Q: What is the primary difference between the YAGEO and Panasonic substitutes?

A: Both parts are electrically and mechanically equivalent. The primary difference is manufacturer designation. RC0100JR-07680RL and RC0100FR-07680RL are YAGEO products, while ERJ-XGNJ681Y is manufactured by Panasonic Electronic Components. All three maintain identical resistance (680 Ohms), power rating (0.03W), package format (01005), and compliance status.

Q: Are package dimensions identical across all three parts?

A: Yes. All parts use the 01005 (0402 Metric) package with dimensions of 0.016" L x 0.008" W (0.40mm x 0.20mm) and maximum seated height of 0.006" (0.15mm). PCB footprint and assembly compatibility are identical.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. RC0100JR-07680RL, RC0100FR-07680RL, and ERJ-XGNJ681Y are all ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity level rating.

Q: What is the tolerance difference between the main part and the upgrade?

A: RC0100JR-07680RL specifies ±5% tolerance, while RC0100FR-07680RL specifies ±1% tolerance. Both ERJ-XGNJ681Y and the main part share ±5% tolerance. Tighter tolerance does not affect backward compatibility.