RC0100JR-071RL Equivalent & Substitute Parts

Part Overview

The RC0100JR-071RL is a 1 Ohm ±5% thick film chip resistor in 01005 (0402 Metric) package format, rated at 0.03W (1/32W) power dissipation. This component is manufactured by YAGEO and maintains Active product status with full RoHS3 compliance. The part is designed for moisture-resistant applications across industrial and commercial temperature ranges (-55°C to 125°C). Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances.

Substiute Parts

RC0100JR-071RL

YAGEOIn Stock: 15236RC0100JR-071RL Datasheet

Current PartRFQ

RC0100FR-071RL

YAGEOIn Stock: 32005RC0100FR-071RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC0100JR-071RL is determined by the following critical parameters:

• Resistance Value: Must be 1 Ohms
• Package Format: Must be 01005 (0402 Metric) for mechanical and electrical compatibility
• Power Rating: Must be 0.03W (1/32W) minimum
• Composition: Thick film construction
• Temperature Coefficient: -200 / +600 ppm/°C range
• Operating Temperature: -55°C to 125°C capability
• Compliance: RoHS3 and REACH Unaffected status

The RC0100FR-071RL qualifies as a direct substitute based on matching all mechanical parameters and operating specifications. The primary distinction is tolerance specification, where the substitute offers improved tolerance performance (±1% versus ±5%).

Parameter Comparison

Engineering Selection Recommendations

Both the RC0100JR-071RL and RC0100FR-071RL maintain Active product status with identical compliance certifications (RoHS3 Compliant, REACH Unaffected). Selection between these parts depends on circuit tolerance requirements. The RC0100JR-071RL with ±5% tolerance is suitable for general-purpose applications where standard tolerance specifications are acceptable. The RC0100FR-071RL with ±1% tolerance provides enhanced precision for circuits requiring tighter resistance value control. Both parts are manufactured by YAGEO in the RC_L series and share identical mechanical, thermal, and environmental specifications.

Frequently Asked Questions (FAQ)

Q: Can RC0100FR-071RL replace RC0100JR-071RL in existing designs?

A: Yes. The RC0100FR-071RL is mechanically and electrically compatible. Both parts share identical package format (01005), power rating (0.03W), temperature range (-55°C to 125°C), and thermal characteristics. The substitute offers improved tolerance (±1% versus ±5%).

Q: What is the primary difference between these two parts?

A: The tolerance specification differs. RC0100JR-071RL has ±5% tolerance, while RC0100FR-071RL has ±1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are both parts RoHS3 compliant?

A: Yes. Both RC0100JR-071RL and RC0100FR-071RL are RoHS3 Compliant with REACH Unaffected status.

Q: Do these parts have the same package dimensions?

A: Yes. Both parts use the 01005 (0402 Metric) package with dimensions of 0.016" L x 0.008" W (0.40mm x 0.20mm) and maximum seated height of 0.006" (0.15mm).

Q: What is the moisture sensitivity level for these resistors?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.