RBR1L60ATE25 Equivalent & Substitute Parts Reference (Diodes, Rectifiers)

Part Overview

The RBR1L60ATE25 from Rohm Semiconductor is a Schottky diode rated for 60 V reverse voltage and 1 A average rectified current, intended for surface mount applications in the PMDS (DO-214AC, SMA) package. It is categorized under Diodes, Rectifiers, with fast recovery and low forward voltage drop characteristics. However, its part status is "Not For New Designs," creating a need to identify equivalent or substitute diodes with compatible electrical and mechanical parameters for ongoing or future design requirements.

Key Parameters

Parameter	RBR1L60ATE25 Value
Category	Diodes, Rectifiers
Technology	Schottky
Voltage - DC Reverse (Vr) (Max)	60 V
Current - Average Rectified (Io)	1A
Voltage - Forward (Vf) (Max) @ If	530 mV @ 1A
Current - Reverse Leakage @ Vr	75 µA @ 60 V
Speed	Fast Recovery =< 500ns, > 200mA (Io)
Mounting Type	Surface Mount
Package / Case	DO-214AC, SMA
Operating Temperature - Junction	150°C
RoHS Status	ROHS3 Compliant
MSL	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitute diodes must match or closely align with RBR1L60ATE25 in the following strictly defined parameters:

Schottky technology
Maximum DC reverse voltage: 60 V
Average rectified current: 1 A (or higher)
Maximum forward voltage at 1 A: Comparable to 530 mV
Maximum reverse leakage current at 60 V: Comparable or higher
Fast recovery: =< 500ns, > 200mA (Io)
Surface mount package compatible with DO-214AC (SMA) or similar
Operating junction temperature up to 150°C
RoHS and REACH compliance
Moisture Sensitivity Level (MSL) of 1 (unlimited)

Only products meeting these criteria are considered as substitutes or equivalents.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Package / Case	Technology	Vr (Max)	Io	Vf (Max) @ 1A	Reverse Leakage @ Vr	Speed	Mounting Type	Operating Temp - Junction	RoHS	MSL	REACH	Status
RBR1L60ATE25	Rohm Semiconductor	DO-214AC, SMA (PMDS)	Schottky	60 V	1A	530 mV	75 µA @ 60 V	Fast Recovery =< 500ns, > 200mA (Io)	Surface Mount	150°C	ROHS3	1 (Unlimited)	Unaffected	Not For New Designs
RBR1LAM60ATR	Rohm Semiconductor	SOD-128 (PMDTM)	Schottky	60 V	1A	530 mV	75 µA @ 60 V	Fast Recovery =< 500ns, > 200mA (Io)	Surface Mount	150°C	ROHS3	1 (Unlimited)	Unaffected	Not For New Designs
MBRA160T3G	onsemi	DO-214AC, SMA	Schottky	60 V	1A	510 mV	200 µA @ 60 V	Fast Recovery =< 500ns, > 200mA (Io)	Surface Mount	-55°C ~ 150°C	ROHS3	1 (Unlimited)	Unaffected	Active
SS16-LTP	Micro Commercial Co	DO-214AC, SMA	Schottky	60 V	1A	700 mV	500 µA @ 60 V	Fast Recovery =< 500ns, > 200mA (Io)	Surface Mount	-55°C ~ 150°C	ROHS3	1 (Unlimited)	Unaffected	Active
CDBA360LR-HF	Comchip Technology	DO-214AC, SMA	Schottky	60 V	3A	550 mV @ 3A	500 µA @ 60 V	Fast Recovery =< 500ns, > 200mA (Io)	Surface Mount	-50°C ~ 150°C	ROHS3	1 (Unlimited)	Unaffected	Active

Engineering Selection Recommendations

Only parts listed as "Active" are suitable for new designs based on part and compliance status. Substitute parts MBRA160T3G, SS16-LTP, and CDBA360LR-HF are all ROHS3 compliant, have MSL 1 classification, and are REACH unaffected. Substitute selection must be aligned with application compliance requirements and part status.

Frequently Asked Questions (FAQ)

Q1: What are the primary parameters to match when selecting a substitute for RBR1L60ATE25?
A1: Substitution requires identical or closely matched reverse voltage rating (60 V), average rectified current (1 A or higher), Schottky technology, similar forward voltage, comparable reverse leakage current, recovery speed, surface mount package, and environmental compliance.

Q2: Are package differences significant for substitution?
A2: Yes. While all substitutes are surface-mount, specific package types (DO-214AC, SMA vs. SOD-128, PMDTM) must be compatible with the target PCB footprint and assembly process.

Q3: Can substitutes with higher current rating be used?
A3: Yes, provided all other required parameters are met and the higher current does not conflict with system requirements.

Q4: Are all listed substitutes suitable for new designs?
A4: Only parts listed as "Active" in the Product Status field are indicated as suitable for new designs.

Q5: What compliance certifications are standard for all listed substitutes?
A5: All substitutes are ROHS3 compliant, rated MSL 1 (Unlimited), and REACH unaffected.

Q6: Is it necessary to match the voltage forward drop (Vf) exactly?
A6: The substitute's forward voltage (Vf) should be comparable to avoid impacting efficiency, but some variation is represented in suitable substitute options provided.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message