RBQ10BM45AFHTL Equivalent & Substitute Parts Reference

Part Overview

RBQ10BM45AFHTL by Rohm Semiconductor is a Schottky diode array in the Diodes, Rectifiers category. The device features a 1-pair common cathode configuration, a maximum reverse voltage of 45 V, and an average rectified current of 10 A per diode. It is automotive qualified (AEC-Q101) and comes in a TO-252-3, DPAK (2 Leads + Tab), SC-63 package. The product is active and compliant with RoHS3 and REACH. Alternative models may be required due to stock availability, packaging preferences, or manufacturing logistics.

Substiute Parts

RBQ10BM45AFHTL

Rohm SemiconductorIn Stock: 3442RBQ10BM45AFHTL Datasheet

Current PartRFQ

RBQ10BGE45ATL

Rohm SemiconductorIn Stock: 1828RBQ10BGE45ATL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is based strictly on matching key electrical, mechanical, and compliance parameters. The following criteria are used: diode configuration, technology, maximum reverse voltage, average rectified current per diode, maximum forward voltage at a specified current, switching speed, reverse leakage current, operating temperature range, mounting type, package outline, automotive qualification, and RoHS/REACH status.

Parameter Comparison

Engineering Selection Recommendations

Select substitute parts that match the main part’s product status (Active), RoHS3 compliance, and REACH status. Qualification and packaging must be verified according to specific logistics and inventory requirements using only the parameters listed.

Frequently Asked Questions (FAQ)

Q1: What parameters are used to determine if RBQ10BGE45ATL can substitute RBQ10BM45AFHTL?
A1: Substitute eligibility is determined by matching diode configuration, technology, voltage and current ratings, package, compliance standards (RoHS, REACH), and product status.

Q2: Are there packaging differences between RBQ10BM45AFHTL and RBQ10BGE45ATL?
A2: RBQ10BM45AFHTL is available in Cut Tape (CT) & Digi-Reel®, while RBQ10BGE45ATL is provided in Tape & Reel (TR) packaging.

Q3: Can differences in reverse leakage current affect substitutability?
A3: The reverse leakage current is listed for both models (150 µA vs. 70 µA at 45 V); this parameter must be compared as part of substitution criteria.

Q4: Is automotive qualification (AEC-Q101) required for substitution?
A4: Automotive qualification is a listed parameter for RBQ10BM45AFHTL and must be considered when substitution demands the same qualification.

Q5: Are package types and mounting compatible?
A5: Both devices use the TO-252-3, DPAK (2 Leads + Tab), SC-63 surface mount package, allowing for mechanical compatibility based on provided information.