RB088NS200FHTL Equivalent & Substitute Parts

Part Overview

The RB088NS200FHTL is a Schottky diode array manufactured by Rohm Semiconductor, configured as 1 pair common cathode with 200V reverse voltage rating and 10A average rectified current per diode. This component is designed for surface mount applications in automotive-grade circuits requiring fast recovery rectification. The part is currently in active production status with AEC-Q101 automotive qualification. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

RB088NS200FHTL

Rohm SemiconductorIn Stock: 1959RB088NS200FHTL Datasheet

Current PartRFQ

RB088NS200TL

Rohm SemiconductorIn Stock: 1599RB088NS200TL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RB088NS200FHTL is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Voltage - DC Reverse (Vr) (Max): 200 V
• Current - Average Rectified (Io) (per Diode): 10 A
• Voltage - Forward (Vf) (Max) @ If: 880 mV @ 5 A
• Current - Reverse Leakage @ Vr: 7 µA @ 200 V
• Operating Temperature - Junction (Max): 150°C

Mechanical & Configuration Parameters (Must Match):

• Diode Configuration: 1 Pair Common Cathode
• Package / Case: TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
• Mounting Type: Surface Mount
• Technology: Schottky

Compliance & Quality Parameters (Must Match):

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant

The RB088NS200TL is identified as a parametric equivalent because it maintains identical electrical ratings, mechanical packaging, diode configuration, and automotive qualification across all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the RB088NS200FHTL and RB088NS200TL are active production parts manufactured by Rohm Semiconductor with identical electrical specifications, mechanical packaging, and automotive-grade AEC-Q101 qualification. Selection between these parts is based on availability and supply chain requirements rather than technical differentiation.

The RB088NS200FHTL maintains 1920 pieces in current inventory stock. The RB088NS200TL maintains 1559 pieces in current inventory stock. Both parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level), indicating no special storage or handling requirements beyond standard component practices.

For applications requiring the 200V reverse voltage rating, 10A average rectified current per diode, and fast recovery Schottky technology in automotive-grade surface mount TO-263-3 D2PAK packaging, either part number is electrically and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can RB088NS200TL be used as a direct replacement for RB088NS200FHTL?

A: Yes. Both parts are identical across all electrical parameters (200V reverse voltage, 10A average rectified current, 880mV forward voltage at 5A, 7µA reverse leakage at 200V), mechanical packaging (TO-263-3 D2PAK surface mount), diode configuration (1 pair common cathode), and automotive qualification (AEC-Q101). Direct substitution is valid for circuit design and PCB layout.

Q: Are there any differences in the package or pinout between these parts?

A: No. Both parts use identical TO-263-3 D2PAK (2 Leads + Tab) TO-263AB packaging with surface mount mounting type. Pinout and PCB footprint are identical.

Q: What is the difference between RB088NS200FHTL and RB088NS200TL?

A: The parts differ only in supplier device package designation (FHTL versus TL). All electrical specifications, mechanical dimensions, and performance characteristics are identical. The difference reflects internal Rohm Semiconductor packaging or distribution variants.

Q: Are both parts suitable for automotive applications?

A: Yes. Both parts carry automotive grade classification and AEC-Q101 qualification, meeting automotive industry reliability and quality standards.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard component storage and handling practices apply.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. No design changes, PCB modifications, or circuit alterations are required when substituting between RB088NS200FHTL and RB088NS200TL. Both parts are pin-compatible and electrically equivalent.