RAVF104DJT680R Equivalent & Substitute Parts

Part Overview

The RAVF104DJT680R is a 680 Ohm isolated 4-resistor network array manufactured by Stackpole Electronics Inc. This surface mount component is designed for automotive applications and meets AEC-Q200 qualification standards. The part is currently active in production with 810 units in stock. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility for circuit designs requiring this specific resistor network configuration.

Substiute Parts

RAVF104DJT680R

Stackpole Electronics IncIn Stock: 843RAVF104DJT680R Datasheet

Current PartRFQ

YC124-JR-07680RL

YAGEOIn Stock: 20774YC124-JR-07680RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RAVF104DJT680R is based on strict equivalence of the following critical parameters:

• Resistance value: 680 Ohm
• Tolerance: ±5%
• Number of resistors: 4 isolated elements
• Power per element: 62.5mW
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C to 155°C
• Package configuration: 0804 with convex, long side terminals
• Pin count: 8
• Circuit type: Isolated
• Automotive grade with AEC-Q200 qualification
• Surface mount technology
• RoHS3 compliance

The YC124-JR-07680RL from YAGEO meets all these electrical and mechanical specifications, making it a direct functional equivalent for the RAVF104DJT680R.

Parameter Comparison

Engineering Selection Recommendations

Both the RAVF104DJT680R and YC124-JR-07680RL are active production parts with automotive-grade qualification and AEC-Q200 certification. Selection between these parts should be based on availability, lead time, and supply chain requirements. The YC124-JR-07680RL currently has higher inventory availability at 20,727 units compared to 810 units for the RAVF104DJT680R. Both parts meet identical electrical specifications and are suitable for direct substitution in automotive applications requiring isolated 680 Ohm resistor networks. The maximum seated height difference of 0.002" (0.05mm) between the two parts is negligible for standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the YC124-JR-07680RL replace the RAVF104DJT680R in existing designs?

A: Yes. Both parts are electrically and mechanically equivalent with identical resistance values, tolerances, temperature coefficients, operating ranges, and package configurations. Direct substitution is supported without circuit redesign.

Q: Are there differences in the physical dimensions between these parts?

A: The parts share identical length and width dimensions of 0.079" x 0.039" (2.00mm x 1.00mm). The maximum seated height differs by 0.002" (0.05mm), with the RAVF104DJT680R at 0.020" and the YC124-JR-07680RL at 0.022". This difference is within standard PCB assembly tolerances.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both the RAVF104DJT680R and YC124-JR-07680RL are automotive-grade components with AEC-Q200 qualification, suitable for automotive applications.

Q: What is the significance of the isolated circuit type?

A: The isolated circuit type indicates that each of the four resistors in the network is electrically independent with no internal connections between elements. This configuration allows flexible circuit design where each resistor can be used independently or in various combinations.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic components.