RASH722P Equivalent & Substitute Parts

Part Overview

The RASH722P is a power barrel connector jack manufactured by Switchcraft Inc., designed for applications requiring a 2.00mm ID (0.079"), 5.50mm OD (0.217") power connection. This surface mount, right angle through-hole connector features a single normally closed switch and supports 5A current rating. The part is actively stocked with 1045 units in inventory. Substitute parts become necessary when addressing specific packaging requirements, inventory constraints, or application-specific mounting preferences while maintaining identical electrical and mechanical specifications.

Substiute Parts

RASH722P

Switchcraft Inc.In Stock: 1076RASH722P Datasheet

Current PartRFQ

RASH722PX

Switchcraft Inc.In Stock: 982RASH722PX Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The RASH722PX qualifies as a direct substitute for the RASH722P based on strict equivalence of the following critical parameters:

• Industry Recognized Mating Diameter: 2.00mm ID (0.079"), 5.50mm OD (0.217")
• Connector Type: Jack
• Gender: Male
• Number of Positions/Contacts: 2 Conductors, 2 Contacts
• Internal Switch Configuration: Single Switch, Normally Closed
• Mounting Type: Surface Mount, Right Angle; Through Hole
• Termination Method: Solder
• Current Rating: 5 A
• Contact Material - Plating: Silver
• Housing Material: Thermoplastic
• Contact Material: Copper Alloy
• Body Color: Black
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The primary distinction between these parts is packaging format: RASH722P is supplied in standard packaging, while RASH722PX is supplied in bulk packaging. Both parts share identical electrical performance, mechanical dimensions, and regulatory compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both RASH722P and RASH722PX are active products manufactured by Switchcraft Inc. and maintain full compliance with ROHS3 and REACH regulatory requirements. Selection between these parts should be based on packaging requirements and inventory availability. The RASH722P is supplied in standard packaging with higher current inventory levels (1045 units), while the RASH722PX is supplied in bulk packaging with 915 units available. Both parts are suitable for immediate component selection without additional verification testing, as they share identical electrical specifications, mechanical dimensions, and regulatory certifications.

Frequently Asked Questions (FAQ)

Q: Can RASH722PX be used as a direct replacement for RASH722P?

A: Yes. The RASH722PX is a direct electrical and mechanical equivalent to the RASH722P. Both parts feature identical mating diameters (2.00mm ID, 5.50mm OD), contact configuration (2 conductors, 2 contacts), current rating (5A), mounting type (surface mount, right angle through-hole), and regulatory compliance status (ROHS3, REACH Unaffected). The only difference is packaging format.

Q: What is the difference between RASH722P and RASH722PX?

A: The primary difference is packaging. RASH722P is supplied in standard packaging, while RASH722PX is supplied in bulk packaging. All electrical, mechanical, and regulatory specifications are identical.

Q: Are there any compatibility concerns when substituting RASH722PX for RASH722P?

A: No compatibility concerns exist. Both parts are manufactured by Switchcraft Inc. and share identical specifications for connector type, gender, mating diameter, contact material, termination method, and current rating. They are mechanically and electrically interchangeable.

Q: What are the key parameters that define substitution eligibility for this barrel connector?

A: Substitution eligibility is determined by: mating diameter (2.00mm ID, 5.50mm OD), connector type (jack), gender (male), number of contacts (2 conductors, 2 contacts), internal switch configuration (single switch, normally closed), mounting type (surface mount, right angle through-hole), termination method (solder), current rating (5A), contact material and plating (copper alloy with silver plating), and regulatory compliance status (ROHS3, REACH Unaffected).

Q: Which part should I select based on current inventory?

A: RASH722P has higher inventory availability (1045 units) compared to RASH722PX (915 units). Selection should be based on packaging requirements and supply chain needs rather than inventory levels alone, as both parts are actively stocked.