Equivalent & Substitute Parts Reference for RAC10-24SB

Part Overview

The RAC10-24SB AC/DC converter, manufactured by Recom Power, is an enclosed, single output power supply delivering 24V at up to 417mA with 10W maximum power. It is designed for ITE (Commercial) applications, featuring short circuit protection and operating over an input range of 90 ~ 264 VAC. It is supplied in a 4-DIP module for through-hole mounting and holds CE and cULus approvals. The series is denoted POWERLINE RAC10-B (10W). The product is marked “Not For New Designs,” indicating that alternative models may be required for ongoing or future design projects.

Substiute Parts

RAC10-24SB

Recom PowerIn Stock: 788RAC10-24SB Datasheet

Current PartRFQ

RAC10-24SC/277

Recom PowerIn Stock: 1518RAC10-24SC/277 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution has been performed strictly based on the following allowed electrical and mechanical parameters: input voltage range, output voltage, output current, output wattage, number of outputs, mounting type, package/case, approval agency, compliance status (RoHS, REACH), and product category. Substitute part RAC10-24SC/277 from Recom Power matches the essential characteristics including output voltage, output wattage, mounting method, and certifications. Parameters used to verify suitability: enclosure type, input supply range, output specs, through-hole package, dimensions, regulatory compliance, and single output configuration.

Parameter Comparison

Engineering Selection Recommendations

The RAC10-24SB is designated Not For New Designs. Substitute RAC10-24SC/277 matches essential electrical, mechanical, and regulatory criteria, including output voltage (24V), wattage (10 W), single output, through-hole mounting, 4-DIP Module package, CE and cULus approval, and ROHS3 compliance. RAC10-24SC/277 also maintains REACH unaffected and MSL 1 (Unlimited) status, which aligns with ongoing production requirements.

Frequently Asked Questions (FAQ)

Q: What are the necessary criteria for selecting a substitute for RAC10-24SB?
A: Substitute selection is based on matching input voltage range, output voltage/current/power, number of outputs, mounting type, package/case dimensions, regulatory approvals, and compliance status.

Q: Does the substitute RAC10-24SC/277 match the enclosure and package specifications?
A: Yes. Both RAC10-24SB and RAC10-24SC/277 are enclosed types in 4-DIP Module for through-hole mounting.

Q: Are the output electrical specifications equivalent?
A: Both models provide a single output at 24V, 10 W, with similar current ratings (417mA vs. 420mA).

Q: Is there a difference in compliance or certification status?
A: Both parts have CE, cULus approvals, ROHS3 compliance, REACH status Unaffected, and MSL 1 (Unlimited).

Q: Can the substitute be used in the same commercial ITE applications?
A: Yes. Both parts are specified for ITE (Commercial) applications.

Q: Are there notable differences in operating temperature or dimensions?
A: The substitute operates from -20°C ~ 70°C (with derating), slightly different from -25°C ~ 70°C. Package dimensions are nearly identical.

Q: Is the substitute recommended for new designs?
A: The product status for RAC10-24SC/277 is Not For New Designs. This information is listed for component selection continuity.