RAC05-05SA Equivalent & Substitute Parts Reference

Part Overview

The RAC05-05SA is an AC/DC converter produced by Recom Power, originally designed for ITE (Commercial) applications requiring a single 5V/1A output and a 90 ~ 264 VAC input voltage range. The unit is encapsulated in an enclosed through-hole 6-DIP module package. It features short circuit protection (SCP), 65% efficiency, and supports operation from -25°C to 70°C with derating. The RAC05-05SA series is now marked as obsolete, making substitute selection necessary for continued production, repair, or design maintenance where this power supply was previously specified.

Substiute Parts

RAC05-05SA

Recom PowerIn Stock: 744RAC05-05SA Datasheet

Current PartRFQ

RAC05-05SK/277

Recom PowerIn Stock: 4588RAC05-05SK/277 Datasheet

DirectRFQ

RAC06-05SC

Recom PowerIn Stock: 2277RAC06-05SC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RAC05-05SA are selected strictly based on compliance with the following parameters: input voltage range, output voltage, output current or higher, output power or higher, number of outputs, mounting type, package compatibility, operating temperature range, regulatory approvals, RoHS and REACH status, and moisture sensitivity level. Only parts which exactly match or exceed these criteria are listed as substitutes and alternatives.

Parameter Comparison

Engineering Selection Recommendations

Product status, RoHS compliance, and regulatory approvals are directly specified for all parts. RAC05-05SK/277 is classified as Active, with all relevant compliance standards matched or exceeded. RAC06-05SC is Not For New Designs, with equivalent RoHS and REACH status, and CE/cULus/EN certifications. Approval agency and compliance status are documented and directly comparable for substitute selection.

Frequently Asked Questions (FAQ)

Q1: What criteria are used to identify substitutes for RAC05-05SA?
A1: Substitutes are determined strictly by matching or exceeding input voltage range, output voltage, output current, power rating, number of outputs, operating temperature, mounting type, package, regulatory approvals, RoHS and REACH status, and moisture sensitivity level.

Q2: Are the mechanical packages of the substitutes identical to the RAC05-05SA?
A2: Substitute parts use different DIP module sizes and lead configurations. Verify specific dimensional and pin compatibility against system requirements during selection.

Q3: Are all substitute parts RoHS3 compliant and REACH unaffected?
A3: Yes, all substitute models listed state ROHS3 Compliant and REACH Unaffected status.

Q4: Is output voltage and current maintained across substitutes?
A4: Both RAC05-05SK/277 and RAC06-05SC provide a 5V output with equal or greater current ratings compared to RAC05-05SA.

Q5: How does the operating temperature range of the substitutes compare to the original part?
A5: Substitute parts offer equal or wider operating temperature ranges than RAC05-05SA.

Q6: What about product status?
A6: RAC05-05SK/277 is Active. RAC06-05SC is Not For New Designs. RAC05-05SA is Obsolete.

Q7: Are agency approvals consistent between all parts?
A7: CE certification is present on all parts. cULus or cURus approval is documented for each substitute. Additional EN approval is listed for RAC06-05SC.