RABS20M-13 Equivalent & Substitute Parts

Part Overview

The RABS20M-13 is a single-phase bridge rectifier manufactured by Diodes Incorporated, designed for surface mount applications in 4-SOPA (Type WX) packaging. This component operates at 1 kV peak reverse voltage with a 2 A average rectified current rating and is classified as Active product status. The device is ROHS3 compliant and REACH unaffected, making it suitable for modern electronic applications requiring regulatory compliance.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, allowing for component interchangeability in circuit designs without performance degradation.

Key Parameters

Parameter	Value
Diode Type	Single Phase
Technology	Standard
Voltage - Peak Reverse (Max)	1 kV
Current - Average Rectified (Io)	2 A
Voltage - Forward (Vf) (Max) @ If	1.3 V @ 2 A
Current - Reverse Leakage @ Vr	1 µA @ 1000 V
Operating Temperature Range	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount
Package / Case	4-SMD, Gull Wing
Supplier Device Package	4-SOPA (Type WX)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the RABS20M-13 is determined by strict equivalence across the following critical parameters:

Diode Type: Single Phase bridge rectifier configuration
Voltage Rating: 1 kV peak reverse voltage maximum
Current Rating: 2 A average rectified current
Forward Voltage Characteristics: 1.3 V maximum at 2 A
Reverse Leakage: 1 µA at 1000 V
Temperature Operating Range: -55°C to 150°C junction temperature
Package Configuration: 4-SMD, Gull Wing in 4-SOPA (Type WX) form factor
Mounting Technology: Surface mount only
Regulatory Compliance: ROHS3 compliant, REACH unaffected

All substitute parts listed maintain identical electrical performance specifications and mechanical compatibility with the original RABS20M-13 component.

Parameter Comparison

Parameter	RABS20M-13	RABS20M
Manufacturer	Diodes Incorporated	Diodes Incorporated
Category	Diodes	Diodes
Diode Type	Single Phase	Single Phase
Technology	Standard	Standard
Voltage - Peak Reverse (Max)	1 kV	1 kV
Current - Average Rectified (Io)	2 A	2 A
Voltage - Forward (Vf) (Max) @ If	1.3 V @ 2 A	1.3 V @ 2 A
Current - Reverse Leakage @ Vr	1 µA @ 1000 V	1 µA @ 1000 V
Operating Temperature	-55°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount	Surface Mount
Package / Case	4-SMD, Gull Wing	4-SMD, Gull Wing
Supplier Device Package	4-SOPA (Type WX)	4-SOPA (Type WX)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99
HTSUS	8541.10.0080	8541.10.0080
Product Status	Active	Active

Engineering Selection Recommendations

The RABS20M-13 and RABS20M are direct parametric equivalents manufactured by Diodes Incorporated. Both components maintain identical electrical specifications across all critical performance parameters including voltage rating, current capacity, forward voltage drop, and reverse leakage characteristics. Both devices are Active product status with ROHS3 compliance and REACH unaffected designation, ensuring regulatory alignment for current manufacturing standards.

Selection between these equivalent parts is based on availability and inventory considerations rather than technical performance differentiation. The RABS20M maintains higher inventory availability at 4400 pieces compared to RABS20M-13 at 1030 pieces. Both components are suitable for direct substitution in applications requiring 1 kV, 2 A single-phase bridge rectification in surface mount 4-SOPA packaging.

Frequently Asked Questions (FAQ)

Q: Can RABS20M be used as a direct replacement for RABS20M-13?

A: Yes. The RABS20M is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters including voltage rating, current capacity, forward voltage, reverse leakage, operating temperature range, and package configuration are equivalent.

Q: Are there any differences in package configuration between these parts?

A: No. Both RABS20M-13 and RABS20M use identical 4-SMD, Gull Wing packaging in the 4-SOPA (Type WX) form factor, ensuring mechanical compatibility and identical PCB footprint requirements.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both components are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

Q: What is the operating temperature range for these bridge rectifiers?

A: Both parts operate across a junction temperature range of -55°C to 150°C, providing thermal performance suitable for industrial and commercial applications.

Q: Are there any moisture sensitivity considerations for these components?

A: The RABS20M specifies Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution is based on equivalence across peak reverse voltage (1 kV), average rectified current (2 A), forward voltage drop (1.3 V @ 2 A), and reverse leakage current (1 µA @ 1000 V). All parameters must match exactly for direct substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message