R7F7015693AFP#KA2 Equivalent & Substitute Parts

Part Overview

The R7F7015693AFP#KA2 is a 32-bit microcontroller IC manufactured by Renesas Electronics Corporation in LFQFP packaging. This component is classified as an embedded microcontroller and is currently listed with obsolete product status. Due to its obsolete classification, identification of equivalent and substitute parts is necessary to support ongoing system maintenance, redesign initiatives, and procurement continuity for applications utilizing this microcontroller.

Substiute Parts

R7F7015693AFP#KA2

Renesas Electronics CorporationIn Stock: 1033R7F7015693AFP#KA2 Datasheet

Current PartRFQ

R7F7015693AFP-C#KA2

Renesas Electronics CorporationIn Stock: 975R7F7015693AFP-C#KA2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the R7F7015693AFP#KA2 is determined by the following criteria:

Manufacturer Alignment: Both the main part and substitute parts must originate from Renesas Electronics Corporation to ensure design compatibility and technical support consistency.

Base Product Number Match: The substitute part R7F7015693AFP-C#KA2 shares the identical base product number R7F7015693, indicating a direct product line relationship within the same microcontroller family.

Device Classification: Both parts are classified as 32-bit microcontroller ICs within the embedded category, confirming functional equivalence at the core architecture level.

Compliance Certifications: Both parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory alignment for applications subject to environmental and hazardous substance restrictions.

Moisture Sensitivity: Both parts carry an MSL rating of 3 (168 Hours), establishing equivalent handling, storage, and reflow requirements.

Product Status Consideration: The substitute part R7F7015693AFP-C#KA2 maintains active product status, providing ongoing availability and manufacturer support, whereas the main part is obsolete.

Parameter Comparison

Engineering Selection Recommendations

For Obsolescence Mitigation: The R7F7015693AFP-C#KA2 is the primary substitute for the obsolete R7F7015693AFP#KA2. Both parts share the same base product number and manufacturer, ensuring design compatibility within the Renesas R7F7015693 microcontroller family.

For Regulatory Compliance: Both parts satisfy ROHS3 compliance and REACH Unaffected requirements. Selection between these parts does not introduce regulatory risk for applications subject to environmental directives.

For Supply Chain Continuity: The substitute part maintains active product status with documented inventory availability (956 Pcs New Original In Stock), providing reliable procurement pathways compared to the obsolete main part.

For Handling and Storage: Equivalent MSL ratings (3, 168 Hours) ensure that existing handling, storage, and reflow procedures remain valid for the substitute part without modification to manufacturing processes.

Frequently Asked Questions (FAQ)

Q: Can the R7F7015693AFP-C#KA2 directly replace the R7F7015693AFP#KA2 in existing designs?

A: Both parts share the same base product number (R7F7015693) and are manufactured by Renesas Electronics Corporation. Substitution is supported at the microcontroller family level. However, packaging differences (LFQFP versus 144-LQFP) must be evaluated for PCB layout compatibility and pin configuration alignment.

Q: What is the significance of the packaging designation difference between LFQFP and 144-LQFP?

A: The packaging designation indicates the physical form factor and pin count. LFQFP and 144-LQFP represent different package types within the Renesas product line. PCB footprint, pin pitch, and board layout requirements differ between these packages. Design verification is required to confirm mechanical and electrical compatibility with existing circuit board designs.

Q: Are the moisture sensitivity requirements identical between these parts?

A: Yes. Both parts carry an MSL rating of 3 (168 Hours), establishing equivalent moisture sensitivity classifications. Existing handling, storage, and reflow procedures for the main part apply directly to the substitute part without modification.

Q: Why is the main part listed as obsolete?

A: Product obsolescence is determined by the manufacturer based on market demand, production continuity, and product lifecycle management. The substitute part R7F7015693AFP-C#KA2 maintains active status, indicating ongoing manufacturer support and availability.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant and REACH Unaffected, satisfying equivalent regulatory requirements for environmental and hazardous substance restrictions.

Q: What inventory status should influence component selection?

A: The substitute part R7F7015693AFP-C#KA2 has documented inventory of 956 Pcs New Original In Stock, compared to the obsolete main part with 1016 Pcs. For new designs and long-term supply assurance, the active substitute part is the appropriate selection.