R7F7015313AFP#KA2 Equivalent & Substitute Parts

Part Overview

The R7F7015313AFP#KA2 is a 32-bit microcontroller IC manufactured by Renesas Electronics Corporation in LFQFP packaging. This embedded microcontroller is classified as obsolete, indicating that the original manufacturer has discontinued production and support. Due to its obsolete status, sourcing replacement units from original inventory becomes increasingly difficult. Identifying equivalent and substitute parts ensures continuity in system maintenance, repair operations, and legacy product support where this microcontroller remains in active deployment.

Substiute Parts

R7F7015313AFP#KA2

Renesas Electronics CorporationIn Stock: 758R7F7015313AFP#KA2 Datasheet

Current PartRFQ

R7F7015313AFP-C#KA2

Renesas Electronics CorporationIn Stock: 858R7F7015313AFP-C#KA2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the R7F7015313AFP#KA2 is determined by the following critical parameters:

Base Product Number Alignment: Both the main part and substitute part share the base product number R7F7015313, indicating they are derived from the same microcontroller architecture and core functionality.

Manufacturer Consistency: Both parts are manufactured by Renesas Electronics Corporation, ensuring design compatibility and technical support continuity.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH Unaffected status, satisfying environmental and regulatory requirements for equivalent substitution.

Moisture Sensitivity Level: Both parts carry MSL rating of 3 (168 Hours), requiring identical handling, storage, and reflow conditions during assembly and rework operations.

Device Classification: Both parts function as 32-bit microcontroller ICs within the embedded category, maintaining functional equivalence for system-level integration.

The primary distinction between the main part and substitute part lies in packaging designation and product status, with the substitute part (R7F7015313AFP-C#KA2) carrying active product status and LQFP packaging specification.

Parameter Comparison

Engineering Selection Recommendations

For Obsolete Part Replacement: The R7F7015313AFP-C#KA2 serves as the active equivalent to the obsolete R7F7015313AFP#KA2. Both parts share identical regulatory compliance certifications (ROHS3 and REACH Unaffected) and moisture sensitivity specifications, establishing them as functionally equivalent at the component level.

Inventory Availability: The substitute part R7F7015313AFP-C#KA2 maintains active product status with 757 units in current inventory, compared to the obsolete main part with 652 units. Selection of the active substitute part ensures long-term availability and continued manufacturer support.

Compliance Continuity: Both parts satisfy identical environmental and regulatory requirements, permitting direct substitution in applications where compliance documentation and traceability are required.

Packaging Consideration: The packaging designation differs between the main part (LFQFP) and substitute part (LQFP). This distinction requires verification against printed circuit board layout specifications and assembly process parameters to confirm mechanical and thermal compatibility.

Frequently Asked Questions (FAQ)

Q: Can the R7F7015313AFP-C#KA2 directly replace the R7F7015313AFP#KA2 in existing applications?

A: Both parts share the same base product number, manufacturer, bit width, and regulatory compliance status. Substitution is permissible when packaging designations (LFQFP versus LQFP) are compatible with existing printed circuit board designs and assembly equipment specifications.

Q: What is the significance of the product status difference between these parts?

A: The main part carries obsolete status, indicating discontinued manufacturing and support from Renesas Electronics Corporation. The substitute part maintains active status, ensuring ongoing availability, technical support, and compliance with current manufacturing standards.

Q: Are the moisture sensitivity requirements identical for both parts?

A: Both parts carry MSL rating 3 (168 Hours), requiring identical handling protocols, storage conditions, and reflow process parameters during assembly and rework operations.

Q: How do the packaging designations affect component selection?

A: LFQFP and LQFP represent different package specifications. Verification against printed circuit board footprint designs, assembly process capabilities, and thermal management requirements is necessary to confirm mechanical and electrical compatibility.

Q: Do both parts satisfy the same regulatory and environmental requirements?

A: Both parts maintain ROHS3 compliance and REACH Unaffected status, satisfying identical environmental and regulatory requirements for equivalent substitution in regulated applications.

Q: What inventory considerations apply to component selection?

A: The substitute part R7F7015313AFP-C#KA2 carries active product status with 757 units available, compared to the obsolete main part with 652 units. Active status provides assurance of continued availability and manufacturer support.