R7F7015264AFP#KA2 Equivalent & Substitute Parts

Part Overview

The R7F7015264AFP#KA2 is a 32-bit microcontroller IC manufactured by Renesas Electronics Corporation in LFQFP packaging. This embedded microcontroller is classified as obsolete, indicating that the original manufacturer has discontinued production and support. Due to its obsolete status, identifying functionally equivalent substitute parts is essential for system maintenance, repair, and redesign applications where continued component availability is required.

Substiute Parts

R7F7015264AFP#KA2

Renesas Electronics CorporationIn Stock: 1190R7F7015264AFP#KA2 Datasheet

Current PartRFQ

R7F7015264AFP-C#KA2

Renesas Electronics CorporationIn Stock: 782R7F7015264AFP-C#KA2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the R7F7015264AFP#KA2 is determined by the following critical parameters:

Base Product Number Match: The substitute part must share the same base product number (R7F7015264) to ensure core microcontroller functionality and instruction set compatibility.

Manufacturer Consistency: Both the main part and substitute are manufactured by Renesas Electronics Corporation, ensuring design continuity and technical support alignment.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements for industrial and commercial applications.

Moisture Sensitivity Level: Both parts are rated at MSL 3 (168 Hours), indicating identical handling, storage, and reflow requirements during assembly and deployment.

Product Category: Both parts are classified as embedded microcontroller ICs, confirming functional equivalence within the same product family.

The substitute part R7F7015264AFP-C#KA2 meets all substitution criteria and is currently in active production status, providing a viable alternative to the obsolete main part.

Parameter Comparison

Engineering Selection Recommendations

For Obsolete Part Replacement: The R7F7015264AFP-C#KA2 is the appropriate substitute for the obsolete R7F7015264AFP#KA2. Both parts share the same base product number and maintain identical regulatory compliance certifications (ROHS3 and REACH unaffected status).

For New Designs: The R7F7015264AFP-C#KA2 is recommended for new development projects due to its active product status, ensuring long-term availability, manufacturer support, and continued technical documentation access.

For Maintenance and Repair: Either part may be used for field replacement applications, provided that the specific packaging and pinout requirements of the target application are satisfied. The active status of the substitute part ensures future procurement feasibility.

Compliance Assurance: Both parts maintain identical MSL ratings and environmental compliance certifications, eliminating the need for requalification of assembly processes or storage procedures.

Frequently Asked Questions (FAQ)

Q: Can the R7F7015264AFP-C#KA2 directly replace the R7F7015264AFP#KA2 in existing applications?

A: Yes. Both parts share the same base product number (R7F7015264), identical MSL ratings, and equivalent regulatory compliance. The substitute part is functionally equivalent for embedded microcontroller applications.

Q: What is the significance of the packaging designation difference (LFQFP vs. LQFP)?

A: The packaging designation indicates the physical form factor. Both designations refer to low-profile quad flat pack configurations. Verification of pinout compatibility and PCB footprint requirements is necessary before implementation in specific circuit designs.

Q: Why is the main part classified as obsolete?

A: Obsolete status indicates that Renesas Electronics Corporation has discontinued production of the R7F7015264AFP#KA2. The substitute part R7F7015264AFP-C#KA2 remains in active production, providing continued availability and manufacturer support.

Q: Are there any differences in regulatory compliance between the two parts?

A: No. Both parts maintain identical ROHS3 compliance and REACH unaffected status, eliminating the need for regulatory requalification when transitioning from the main part to the substitute.

Q: What is the MSL rating, and why is it important?

A: Both parts are rated at MSL 3 (168 Hours), indicating maximum exposure to moisture at specified temperature and humidity conditions before soldering. Identical ratings ensure that existing assembly and storage procedures remain valid for the substitute part.

Q: Is inventory availability a factor in part selection?

A: Inventory levels are provided for reference. The main part has 1111 units in stock, while the substitute has 681 units available. For long-term applications, the active status of the substitute part ensures future procurement capability beyond current inventory levels.