R7F7010184AFP#AA2 Equivalent & Substitute Parts

Part Overview

The R7F7010184AFP#AA2 is a 32-bit single-core RH850G3K microcontroller manufactured by Renesas Electronics Corporation, operating at 80MHz with 512KB FLASH memory. This device is classified as obsolete, which necessitates identification of active equivalent alternatives for ongoing design support and procurement.

Substiute Parts

R7F7010184AFP#AA2

Renesas Electronics CorporationIn Stock: 1068R7F7010184AFP#AA2 Datasheet

Current PartRFQ

R7F7010184AFP#KA4

Renesas Electronics CorporationIn Stock: 947R7F7010184AFP#KA4 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the R7F7010184AFP#AA2 is based on strict equivalence across all electrical and mechanical parameters. The substitute part R7F7010184AFP#KA4 maintains identical specifications for core processor architecture, memory configuration, I/O count, voltage supply range, connectivity interfaces, and package form factor. The primary distinction is product status: the main part is obsolete while the substitute is active, enabling continued component availability without design modification.

Substitution criteria are limited to the following parameters:

• Core processor type and speed (RH850G3K, 80MHz)
• Memory configuration (512KB FLASH, 32KB EEPROM, 64KB RAM)
• I/O pin count (65)
• Supply voltage range (3V ~ 5.5V)
• Package type and dimensions (80-LQFP 12x12)
• Connectivity and peripheral feature set

Parameter Comparison

Engineering Selection Recommendations

The R7F7010184AFP#KA4 is the direct parametric equivalent for the obsolete R7F7010184AFP#AA2. Both devices are manufactured by Renesas Electronics Corporation and share identical electrical and mechanical specifications. The substitute part maintains active product status, ensuring availability for new procurement and design continuity. Both parts comply with ROHS3 standards and carry identical moisture sensitivity ratings. Selection of the active substitute part eliminates obsolescence risk while preserving full design compatibility.

Frequently Asked Questions (FAQ)

Q: Can R7F7010184AFP#KA4 be used as a direct replacement for R7F7010184AFP#AA2?

A: Yes. Both parts are identical in core processor, memory configuration, I/O count, voltage supply range, connectivity interfaces, and 80-LQFP package form factor. The substitute part is active while the main part is obsolete.

Q: Are there any differences in pin configuration or package dimensions?

A: No. Both parts use the 80-LQFP (12x12) package with identical pin assignments and mechanical dimensions.

Q: Do both parts support the same operating temperature range?

A: Yes. Both parts operate across -40°C to 125°C (TA).

Q: Are there compliance differences between the two parts?

A: Both parts are ROHS3 compliant with identical moisture sensitivity levels (MSL 3, 168 Hours).

Q: What is the primary reason for substitution?

A: The R7F7010184AFP#AA2 is classified as obsolete. The R7F7010184AFP#KA4 provides equivalent functionality with active product status for ongoing procurement.