Equivalent & Substitute Parts for R7F7010133AFP#KA2

Part Overview

The R7F7010133AFP#KA2 is a 32-bit single-core RH850G3K microcontroller manufactured by Renesas Electronics Corporation, designed for embedded applications requiring CANbus, LINbus, and SPI connectivity. This device features 512KB FLASH program memory, 64KB RAM, and operates at 80MHz across an industrial temperature range of -40°C to 105°C in a 64-LFQFP surface mount package.

The R7F7010133AFP#KA2 carries an Obsolete product status. Identifying equivalent substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support long-term production requirements for applications currently utilizing this microcontroller.

Substiute Parts

R7F7010133AFP#KA2

Renesas Electronics CorporationIn Stock: 841R7F7010133AFP#KA2 Datasheet

Current PartRFQ

R7F7010133AFP#KA4

Renesas Electronics CorporationIn Stock: 970R7F7010133AFP#KA4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the R7F7010133AFP#KA2 is determined by strict equivalence across the following critical parameters:

• Core Processor Architecture: RH850G3K
• Memory Configuration: 512KB FLASH, 64KB RAM, 32KB EEPROM
• Operating Frequency: 80MHz
• Peripheral Set: CANbus, CSI, I2C, LINbus, SPI, UART/USART, DMA, PWM, WDT
• I/O Count: 49 pins
• Voltage Range: 3V ~ 5.5V
• Package Type: 64-LQFP surface mount
• Temperature Range: -40°C ~ 105°C
• Data Converter Specifications: A/D 11x10b, 10x12b

The R7F7010133AFP#KA4 meets all substitution criteria as an equivalent part within the RH850/F1L series, with identical electrical and mechanical specifications. The primary distinction is product status and availability.

Parameter Comparison

Engineering Selection Recommendations

The R7F7010133AFP#KA4 is a direct functional equivalent to the R7F7010133AFP#KA2. Both devices share identical electrical specifications, memory configurations, peripheral sets, and package geometry. The R7F7010133AFP#KA4 carries Active product status, ensuring ongoing manufacturer support and supply availability, whereas the R7F7010133AFP#KA2 is classified as Obsolete.

For new designs or production continuity, the R7F7010133AFP#KA4 is the appropriate selection. Both parts maintain ROHS3 compliance and identical moisture sensitivity ratings, supporting equivalent handling and storage requirements. The base product number R7F7010133 remains consistent across both variants, indicating full design compatibility at the functional level.

Frequently Asked Questions (FAQ)

Q: Are R7F7010133AFP#KA2 and R7F7010133AFP#KA4 pin-compatible?

A: Yes. Both devices utilize the 64-LQFP package with identical pin assignments, voltage requirements (3V ~ 5.5V), and I/O configurations (49 pins). Direct PCB substitution is supported without layout modifications.

Q: What is the difference between these two part numbers?

A: The primary difference is product lifecycle status. The R7F7010133AFP#KA2 is Obsolete, while the R7F7010133AFP#KA4 is Active. All electrical, memory, and peripheral specifications are identical.

Q: Can I use R7F7010133AFP#KA4 as a drop-in replacement for R7F7010133AFP#KA2?

A: Yes. The R7F7010133AFP#KA4 is a direct functional equivalent with identical core processor (RH850G3K), memory configuration (512KB FLASH, 64KB RAM, 32KB EEPROM), operating frequency (80MHz), connectivity options, and package specifications. No firmware or hardware modifications are required.

Q: Are there any compliance or certification differences?

A: Both parts maintain ROHS3 compliance and identical Moisture Sensitivity Level (MSL 3, 168 Hours). Handling, storage, and environmental requirements are equivalent.

Q: What is the supply status for each part?

A: R7F7010133AFP#KA2 inventory is limited (732 Pcs available). R7F7010133AFP#KA4 has greater availability (952 Pcs available) and Active product status, ensuring continued supply from Renesas Electronics Corporation.