Ohmite R5J220 220 Ohm 5W Radial Wirewound Resistor Equivalent & Substitute Parts

Part Overview

The Ohmite R5J220 is a 220 Ohm, 5% tolerance, 5W through-hole radial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is currently in stock with 683 pieces available. Substitute parts are necessary to address supply chain flexibility, packaging preferences, and compliance requirements while maintaining identical electrical and mechanical performance specifications.

Substiute Parts

R5J220

OhmiteIn Stock: 705R5J220 Datasheet

Current PartRFQ

R5J220E

OhmiteIn Stock: 870R5J220E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Ohmite R5J220 is determined by strict parametric equivalence across the following critical parameters:

• Resistance Value: Must be 220 Ohms
• Tolerance: Must be ±5%
• Power Rating: Must be 5W
• Composition: Must be Wirewound
• Package Type: Must be Radial Lead
• Temperature Coefficient: Must be ±260ppm/°C
• Physical Dimensions: Must match 0.625" L x 0.344" W (15.88mm x 8.74mm)
• Height - Seated (Max): Must not exceed 0.516" (13.11mm)
• Features: Must include Flame Retardant Coating and Safety features
• Series: Must be PC-58

The R5J220E is classified as a parametric equivalent substitute, meeting all electrical and mechanical specifications while offering alternative packaging and compliance options.

Parameter Comparison

Engineering Selection Recommendations

Both the R5J220 and R5J220E are Active product status components from Ohmite's PC-58 series, ensuring long-term availability and design stability. The primary differentiation between these parts is packaging format and regulatory compliance status.

The R5J220E offers ROHS3 compliance, making it the preferred selection for applications subject to RoHS3 regulatory requirements. The R5J220 remains suitable for applications where RoHS compliance is not mandated. Both parts are electrically and mechanically identical, with identical physical footprints and thermal characteristics, ensuring direct substitution in circuit designs.

The R5J220E is available in Bulk packaging, while the R5J220 uses standard packaging. Selection between these options depends on procurement volume requirements and inventory management practices.

Frequently Asked Questions (FAQ)

Q: Can the R5J220E be used as a direct replacement for the R5J220?

A: Yes. The R5J220E is a parametric equivalent substitute with identical electrical specifications (220 Ohms, ±5%, 5W), composition (Wirewound), package type (Radial Lead), temperature coefficient (±260ppm/°C), and physical dimensions (0.625" L x 0.344" W, 13.11mm max height). Direct substitution is supported without circuit modification.

Q: What is the difference between the R5J220 and R5J220E?

A: The primary differences are packaging format (Standard vs. Bulk) and RoHS compliance status (RoHS non-compliant vs. ROHS3 Compliant). All electrical and mechanical parameters are identical.

Q: Which part should I select for RoHS3-compliant applications?

A: The R5J220E is ROHS3 Compliant and is the appropriate selection for applications requiring RoHS3 regulatory compliance.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical dimensions of 0.625" L x 0.344" W (15.88mm x 8.74mm) with a maximum seated height of 0.516" (13.11mm), ensuring identical PCB footprint compatibility.

Q: What packaging options are available?

A: The R5J220 is available in standard packaging with 683 pieces in stock. The R5J220E is available in Bulk packaging with 785 pieces in stock.