Equivalent & Substitute Parts for R5J160E

Part Overview

The R5J160E is a 160 Ohm, 5W wirewound through-hole resistor manufactured by Ohmite in the PC-58 series. This radial component features flame retardant coating and safety construction, designed for applications requiring reliable power dissipation in compact form factors. The part is currently active in production with ROHS3 compliance certification. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, enabling procurement flexibility and supply chain continuity.

Substiute Parts

R5J160E

OhmiteIn Stock: 1124R5J160E Datasheet

Current PartRFQ

R5J160

OhmiteIn Stock: 1120R5J160 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the R5J160E is determined by strict equivalence across the following critical parameters:

• Resistance value: 160 Ohms
• Tolerance: ±5%
• Power rating: 5W
• Composition: Wirewound
• Package configuration: Radial
• Temperature coefficient: ±260ppm/°C
• Physical dimensions: 0.625" L x 0.344" W with maximum seated height of 0.516"
• Termination count: 2
• Safety features: Flame retardant coating

The R5J160 qualifies as a parametric equivalent based on matching all electrical specifications and mechanical envelope requirements. Differences in RoHS compliance status and packaging designation do not affect functional interchangeability in applications where the core electrical and thermal characteristics are the determining factors.

Parameter Comparison

Engineering Selection Recommendations

Selection between R5J160E and R5J160 is determined by regulatory and compliance requirements:

The R5J160E is specified for applications requiring ROHS3 compliance certification. This part maintains active production status with full regulatory alignment for restricted substance directives.

The R5J160 provides functional equivalence with identical electrical performance and mechanical compatibility. This part is suitable for applications where RoHS compliance is not a procurement requirement. Both parts share the same series designation, resistance value, power rating, and physical envelope, ensuring direct interchangeability at the circuit level.

Selection should be based on the specific compliance mandates of the end application and regional regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can R5J160 be used as a direct replacement for R5J160E in all applications?

A: The R5J160 provides electrical and mechanical equivalence. The primary distinction is RoHS compliance status. Applications requiring ROHS3 certification must use R5J160E. Applications without RoHS mandates can use either part interchangeably.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical dimensions of 0.625" L x 0.344" W (15.88mm x 8.74mm) with a maximum seated height of 0.516" (13.11mm). PCB layout and mechanical mounting are identical.

Q: Do both parts have the same electrical specifications?

A: Yes. Both parts are 160 Ohm, 5W wirewound resistors with ±5% tolerance and ±260ppm/°C temperature coefficient. Electrical performance is equivalent.

Q: What is the significance of the different packaging designations?

A: R5J160E lists packaging as "Bulk" while R5J160 specifies "Radial Lead." Both refer to the same radial lead configuration. The designation difference reflects supplier documentation conventions and does not indicate functional variation.

Q: Are both parts currently in production?

A: Yes. Both R5J160E and R5J160 maintain active product status with current manufacturing availability.