R5F117ACGSP#10 Equivalent & Substitute Parts

Part Overview

The R5F117ACGSP#10 is a 16-bit embedded microcontroller from Renesas Electronics Corporation, part of the RL78/I1D series. This device integrates a RL78 core processor operating at 24MHz with 32KB FLASH program memory, 2KB EEPROM, and 3KB RAM. The microcontroller features integrated connectivity options including CSI, I2C, and UART/USART interfaces, along with peripheral functions such as Low Voltage Detection (LVD), Power-On Reset (POR), and Watchdog Timer (WDT). The device is housed in a 30-LSSOP surface mount package and operates across an extended temperature range of -40°C to 105°C with a supply voltage range of 1.6V to 3.6V.

The R5F117ACGSP#10 maintains Active product status and is ROHS3 compliant. Substitute parts are identified based on identical electrical specifications, memory configurations, and packaging requirements to ensure direct functional replacement in existing designs.

Substiute Parts

R5F117ACGSP#10

Renesas Electronics CorporationIn Stock: 1162R5F117ACGSP#10 Datasheet

Current PartRFQ

R5F117ACGSP#30

Renesas Electronics CorporationIn Stock: 1932R5F117ACGSP#30 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the R5F117ACGSP#10 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

Core Electrical Specifications:

• RL78 core processor architecture
• 16-bit core size
• 24MHz operating frequency
• 32KB FLASH program memory (32K x 8 configuration)
• 2KB EEPROM (2K x 8 configuration)
• 3KB RAM (3K x 8 configuration)
• 1.6V to 3.6V supply voltage range
• 12-channel 8-bit / 12-bit analog-to-digital converter

Connectivity and Peripherals:

• CSI, I2C, and UART/USART interfaces
• LVD, POR, and WDT peripheral functions
• 19 I/O pins
• Internal oscillator

Physical and Environmental Specifications:

• 30-LSSOP surface mount package (0.240", 6.10mm width)
• -40°C to 105°C operating temperature range
• ROHS3 compliance
• MSL 3 (168 Hours) moisture sensitivity level

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes. The R5F117ACGSP#30 is identified as a substitute based on identical specifications across all parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

The R5F117ACGSP#30 is a direct parametric equivalent to the R5F117ACGSP#10 and serves as a suitable substitute component. Both devices are manufactured by Renesas Electronics Corporation and maintain identical electrical, functional, and physical specifications across all critical parameters.

Compliance and Certification: Both the R5F117ACGSP#10 and R5F117ACGSP#30 maintain Active product status with ROHS3 compliance and REACH Unaffected designation. Both devices carry identical MSL 3 (168 Hours) moisture sensitivity ratings and are subject to the same environmental and regulatory requirements.

Functional Compatibility: The devices are functionally interchangeable within the RL78/I1D microcontroller series. Pin configuration, memory architecture, peripheral functionality, and operating characteristics are identical between the two part numbers. No firmware modifications or design changes are required when substituting between these components.

Package and Thermal Characteristics: Both parts utilize the 30-LSSOP surface mount package with identical physical dimensions (0.240", 6.10mm width). Operating temperature ranges, voltage supply specifications, and all electrical characteristics remain constant across both part numbers.

Inventory and Availability: Selection between R5F117ACGSP#10 and R5F117ACGSP#30 may be based on inventory availability and supply chain considerations. The R5F117ACGSP#30 currently maintains higher inventory levels (1849 Pcs) compared to the R5F117ACGSP#10 (1055 Pcs).

Frequently Asked Questions (FAQ)

Q: Are the R5F117ACGSP#10 and R5F117ACGSP#30 pin-compatible?

A: Yes. Both devices utilize the 30-LSSOP package with identical pin configurations. No PCB layout modifications are required when substituting between these part numbers.

Q: What is the difference between the R5F117ACGSP#10 and R5F117ACGSP#30?

A: The two part numbers are parametric equivalents with identical electrical specifications, memory configurations, and functional capabilities. The suffix difference (#10 versus #30) reflects packaging or supply chain variations but does not affect device functionality or performance.

Q: Can I use the R5F117ACGSP#30 as a direct replacement for the R5F117ACGSP#10 in production?

A: Yes. The R5F117ACGSP#30 is a direct substitute with identical specifications. No design changes, firmware modifications, or testing protocols beyond standard component verification are required.

Q: Are both parts ROHS3 compliant?

A: Yes. Both the R5F117ACGSP#10 and R5F117ACGSP#30 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the operating temperature range for these microcontrollers?

A: Both devices operate across an extended temperature range of -40°C to 105°C (TA), suitable for industrial and automotive applications.

Q: Do these devices require external oscillators?

A: No. Both the R5F117ACGSP#10 and R5F117ACGSP#30 feature internal oscillators, eliminating the need for external clock generation circuits.

Q: What is the moisture sensitivity level for these components?

A: Both devices carry an MSL 3 rating with a 168-hour floor life. Standard moisture control procedures during storage and handling are required.

Q: Are firmware and software compatible between the two part numbers?

A: Yes. Both devices are members of the RL78/I1D series with identical core processor architecture, memory configuration, and peripheral functionality. Firmware developed for one part number operates identically on the other.