R5F100PLGFB#10 Equivalent & Substitute Parts

Part Overview

The R5F100PLGFB#10 is a 16-bit embedded microcontroller from Renesas Electronics Corporation belonging to the RL78/G13 series. This IC MCU features 512KB FLASH memory, operates at 32MHz, and is housed in a 100-LQFP (14x14) surface mount package. The device is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product family, ensuring functional interchangeability in circuit designs without redesign requirements.

Substiute Parts

R5F100PLGFB#10

Renesas Electronics CorporationIn Stock: 1271R5F100PLGFB#10 Datasheet

Current PartRFQ

R5F100PLGFB#30

Renesas Electronics CorporationIn Stock: 1451R5F100PLGFB#30 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the R5F100PLGFB#10 are identified based on strict parametric equivalence within the RL78/G13 microcontroller family. The substitution criteria are determined by the following key parameters:

Core Electrical Parameters:

• Core Processor: RL78
• Core Size: 16-Bit
• Speed: 32MHz
• Program Memory Size: 512KB (512K x 8) FLASH
• EEPROM Size: 8K x 8
• RAM Size: 32K x 8
• Voltage Supply Range: 2.4V ~ 5.5V
• Data Converters: A/D 20x8/10b

Mechanical & Environmental Parameters:

• Package / Case: 100-LQFP (14x14)
• Mounting Type: Surface Mount
• Operating Temperature Range: -40°C ~ 105°C (TA)
• Moisture Sensitivity Level: 3 (168 Hours)

Compliance & Status:

• Product Status: Active
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes. Variations in packaging designations (such as tray packaging codes) do not affect functional interchangeability when all electrical and mechanical specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

The R5F100PLGFB#30 is a direct parametric equivalent to the R5F100PLGFB#10. Both devices are manufactured by Renesas Electronics Corporation and maintain identical electrical specifications, memory configurations, peripheral sets, and physical packaging. Both parts carry Active product status and meet ROHS3 compliance requirements with REACH Unaffected designation.

Selection between these parts is based on availability and supply chain considerations. The difference in part number suffix (#10 versus #30) reflects packaging or distribution batch designations from the manufacturer and does not indicate functional or performance differences. Both parts are suitable for applications requiring a 16-bit RL78 microcontroller with 512KB FLASH memory, 32KB RAM, and 8KB EEPROM in a 100-LQFP surface mount package.

Frequently Asked Questions (FAQ)

Q: Are R5F100PLGFB#10 and R5F100PLGFB#30 functionally identical?

A: Yes. Both parts are parametric equivalents with identical core processor architecture, memory configuration, operating frequency, voltage supply range, peripheral set, and package specifications. They are direct substitutes for each other.

Q: What does the suffix (#10 vs #30) indicate?

A: The suffix represents packaging or distribution batch designations from Renesas Electronics Corporation. It does not affect the functional performance or electrical characteristics of the microcontroller.

Q: Can I substitute R5F100PLGFB#30 for R5F100PLGFB#10 in an existing design?

A: Yes. No circuit redesign is required. Both parts are pin-compatible, electrically equivalent, and mechanically identical in the 100-LQFP (14x14) package.

Q: Are there any differences in compliance or certifications?

A: No. Both parts carry identical ROHS3 compliance status and REACH Unaffected designation. Both operate across the same temperature range (-40°C ~ 105°C) and share the same Moisture Sensitivity Level (MSL 3, 168 Hours).

Q: What are the key parameters that define substitutability for this part?

A: Substitutability is determined by: RL78 core processor, 16-bit architecture, 32MHz speed, 512KB FLASH memory, 32KB RAM, 8KB EEPROM, 2.4V ~ 5.5V supply voltage, 100-LQFP package, surface mount mounting type, and -40°C ~ 105°C operating temperature range.

Q: Can I use these parts interchangeably in production?

A: Yes. Both parts meet identical specifications and are suitable for production use without design modifications or additional qualification testing.