R577413107 RF Switch IC DPDT 18GHz Equivalent & Substitute Parts

Part Overview

The R577413107 is an RF Switch IC with DPDT (Double Pole Double Throw) topology designed for general-purpose RF switching applications up to 18GHz. This active product operates across a frequency range of 0Hz to 18GHz with 50Ohm impedance and is housed in a module package with SMA connectors. The component requires a 24V to 30V supply voltage and operates across the industrial temperature range of -40°C to 85°C.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across critical RF parameters, supply voltage specifications, and package configurations. Alternative models serve applications where inventory availability, procurement lead times, or specific compliance certifications require component substitution while preserving circuit functionality.

Key Parameters

Parameter	Value	Unit	Criticality
Circuit Topology	DPDT	-	Critical
Frequency Range	0Hz ~ 18GHz	GHz	Critical
Impedance	50Ohm	Ohm	Critical
Isolation (Minimum)	60dB	dB	Critical
Insertion Loss (Maximum)	0.5dB	dB	Critical
Supply Voltage	24V ~ 30V	V	Critical
Operating Temperature Range	-40°C ~ 85°C	°C	Critical
Package Type	Module, SMA Connectors	-	Critical
RF Type	General Purpose	-	Critical
Test Frequency	18GHz	GHz	Reference

Substitute Part Grouping Explanation

Substitution eligibility for the R577413107 is determined by strict equivalence across the following parameters:

Mandatory Equivalence Criteria:

Circuit topology must be DPDT
Frequency range must support 0Hz to 18GHz operation
Impedance must be 50Ohm
Isolation performance must meet or exceed 60dB minimum
Insertion loss must not exceed 0.5dB maximum
Supply voltage range must accommodate 24V to 30V operation
Operating temperature range must span -40°C to 85°C
Package configuration must be module format with SMA connectors
RF type classification must be General Purpose

The R577413107 has one identified substitute part: R577413000. This substitute maintains identical electrical specifications across all critical RF parameters, supply voltage requirements, and thermal operating conditions. Both components are manufactured by Radiall USA, Inc., share the same DPDT circuit topology, and are housed in equivalent module packages with SMA connectors.

Parameter Comparison

Parameter	R577413107	R577413000	Match Status
Manufacturer	Radiall USA, Inc.	Radiall USA, Inc.	Equivalent
Circuit Topology	DPDT	DPDT	Equivalent
RF Type	General Purpose	General Purpose	Equivalent
Frequency Range	0Hz ~ 18GHz	0Hz ~ 18GHz	Equivalent
Isolation (Minimum)	60dB	60dB	Equivalent
Insertion Loss (Maximum)	0.5dB	0.5dB	Equivalent
Test Frequency	18GHz	18GHz	Equivalent
Impedance	50Ohm	50Ohm	Equivalent
Supply Voltage	24V ~ 30V	24V ~ 30V	Equivalent
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	Equivalent
Package / Case	Module, SMA Connectors	Module, SMA Connectors	Equivalent
Product Status	Active	Active	Equivalent
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Equivalent

Engineering Selection Recommendations

Both the R577413107 and R577413000 are active products manufactured by Radiall USA, Inc., with full ROHS3 compliance certification. Selection between these components is based on availability and procurement requirements rather than electrical or mechanical performance differentiation.

The R577413107 maintains current inventory of 1102 pieces in new original condition. The R577413000 substitute maintains inventory of 739 pieces in new original condition and includes additional compliance documentation: REACH Affected status, ECCN classification as EAR99, and HTSUS code 8543.70.9860. The R577413000 specifies Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity constraints during storage and handling.

Both components satisfy identical electrical performance requirements across the 0Hz to 18GHz frequency range with 50Ohm impedance, 60dB minimum isolation, and 0.5dB maximum insertion loss. Supply voltage and operating temperature specifications are identical. Module package configuration with SMA connectors is consistent across both parts.

Component selection should be determined by inventory availability, procurement timelines, and any specific regulatory or compliance requirements applicable to the end application.

Frequently Asked Questions (FAQ)

Q: Can the R577413000 directly replace the R577413107 in existing circuit designs?

A: Yes. Both components maintain identical electrical specifications across all critical RF parameters including frequency range (0Hz to 18GHz), impedance (50Ohm), isolation (60dB minimum), insertion loss (0.5dB maximum), supply voltage (24V to 30V), and operating temperature range (-40°C to 85°C). Package configuration with SMA connectors is equivalent. Direct substitution is supported without circuit modification.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution eligibility requires equivalence across DPDT circuit topology, 0Hz to 18GHz frequency range, 50Ohm impedance, 60dB minimum isolation, 0.5dB maximum insertion loss, 24V to 30V supply voltage, and -40°C to 85°C operating temperature range. All parameters must be met for component interchangeability.

Q: Are there differences in package or connector specifications between these parts?

A: Both the R577413107 and R577413000 are housed in module packages with SMA connectors. Package and connector specifications are equivalent.

Q: What compliance certifications apply to both components?

A: Both components are ROHS3 compliant. The R577413000 additionally specifies REACH Affected status, EAR99 ECCN classification, and HTSUS code 8543.70.9860. Moisture Sensitivity Level for R577413000 is classified as 1 (Unlimited).

Q: Are both components currently in active production?

A: Yes. Both the R577413107 and R577413000 maintain active product status with Radiall USA, Inc. Current inventory levels are 1102 pieces and 739 pieces respectively, both in new original condition.

Q: What is the significance of the Moisture Sensitivity Level 1 (Unlimited) specification on the R577413000?

A: Moisture Sensitivity Level 1 (Unlimited) indicates that the component has no moisture sensitivity constraints during storage, handling, or transportation. Standard moisture control procedures are not required for this component.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message