R463F222000N0M Film Capacitor Equivalent & Substitute Parts

Part Overview

The R463F222000N0M is a 0.022 µF metallized polypropylene film capacitor manufactured by KEMET, rated for 630V DC operation. This radial through-hole component is designed for EMI and RFI suppression applications with an operating temperature range of -40°C to 110°C. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent capacitance, tolerance, dielectric material, and mounting characteristics are required but alternative voltage ratings, physical dimensions, or manufacturer specifications may better suit specific application requirements.

Key Parameters

Parameter	Value
Capacitance	0.022 µF
Tolerance	±20%
Voltage Rating - DC	630V
Voltage Rating - AC	310V
Dielectric Material	Polypropylene (PP), Metallized
Operating Temperature Range	-40°C to 110°C
Mounting Type	Through Hole
Package / Case	Radial
Termination	PC Pins
Lead Spacing	0.394" (10.00mm)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the R463F222000N0M are grouped into three categories based on substitution criteria:

Parametric Equivalent: Parts that maintain identical electrical specifications (0.022 µF, ±20%, 630V DC, 310V AC) and physical dimensions while differing only in internal construction or packaging codes. These parts are direct functional replacements within the same series.

Similar Substitutes (Higher Voltage Rating): Parts that maintain the same capacitance (0.022 µF) and tolerance (±20%) but feature elevated voltage ratings (1000V DC or 1500V DC). These substitutes are applicable in designs where higher voltage margin is acceptable and physical space permits larger package dimensions. Lead spacing increases from 0.394" to 0.591" in these configurations.

Upgrade Substitute (Intermediate Voltage): Parts that maintain the same capacitance and tolerance with moderately elevated voltage rating (760V DC) while preserving the original lead spacing (0.394") and similar physical footprint. This category bridges the gap between the base specification and higher-voltage alternatives.

Substitution eligibility is determined by:

Identical capacitance value (0.022 µF)
Identical tolerance (±20%)
Identical dielectric material (Polypropylene, Metallized)
Identical mounting type (Through Hole, Radial)
Identical termination (PC Pins)
Compatible operating temperature range (-40°C to 110°C)
ROHS3 compliance maintained across all alternatives

Parameter Comparison

Parameter	R463F222000N0M (Main)	R463F222040N0M (Parametric Equivalent)	R413I22200000M (Similar - 1kV)	R413I222000M1M (Similar - 1kV)	B32911B3223M000 (Upgrade - 760V)	B32022A3223M000 (Similar - 1.5kV)
Manufacturer	KEMET	KEMET	KEMET	KEMET	EPCOS - TDK Electronics	EPCOS - TDK Electronics
Capacitance	0.022 µF	0.022 µF	0.022 µF	0.022 µF	0.022 µF	0.022 µF
Tolerance	±20%	±20%	±20%	±20%	±20%	±20%
Voltage Rating - DC	630V	630V	1000V	1000V	760V	1500V
Voltage Rating - AC	310V	310V	300V	300V	330V	300V
Dielectric Material	Polypropylene (PP), Metallized	Polypropylene (PP), Metallized	Polypropylene (PP), Metallized	Polypropylene (PP), Metallized	Polypropylene (PP), Metallized	Polypropylene (PP), Metallized
Operating Temperature	-40°C to 110°C	-40°C to 110°C	-40°C to 110°C	-40°C to 110°C	-40°C to 110°C	-40°C to 110°C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	Radial	Radial	Radial	Radial	Radial	Radial
Termination	PC Pins	PC Pins	PC Pins	PC Pins	PC Pins	PC Pins
Lead Spacing	0.394" (10.00mm)	0.394" (10.00mm)	0.591" (15.00mm)	0.591" (15.00mm)	0.394" (10.00mm)	0.591" (15.00mm)
Size / Dimension (L x W)	0.512" x 0.157" (13.00mm x 4.00mm)	0.512" x 0.157" (13.00mm x 4.00mm)	0.709" x 0.295" (18.00mm x 7.50mm)	0.709" x 0.236" (18.00mm x 6.00mm)	0.512" x 0.197" (13.00mm x 5.00mm)	0.709" x 0.236" (18.00mm x 6.00mm)
Height - Seated (Max)	0.358" (9.10mm)	0.358" (9.10mm)	0.535" (13.60mm)	0.476" (12.10mm)	0.433" (11.00mm)	0.472" (12.00mm)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

R463F222040N0M (Parametric Equivalent): This KEMET part is the direct parametric equivalent to the R463F222000N0M. Both components share identical electrical specifications, physical dimensions, lead spacing, and voltage ratings. Selection of this part is appropriate when the original part number is unavailable but equivalent performance is required. Both parts maintain ROHS3 compliance and Active product status.

R413I22200000M and R413I222000M1M (Higher Voltage Alternatives): These KEMET R41 series components provide 1000V DC rating compared to the 630V DC specification of the main part. Both alternatives maintain identical capacitance and tolerance. Selection is appropriate for applications requiring elevated voltage margin or where circuit redesign permits increased lead spacing (0.591" versus 0.394"). Both parts carry AEC-Q200 automotive qualification and X1/Y2 ratings. Physical dimensions increase to 18.00mm length. The R413I222000M1M variant features a reduced width (6.00mm versus 7.50mm) compared to R413I22200000M.

B32911B3223M000 (Upgrade - Intermediate Voltage): This EPCOS-TDK Electronics part provides 760V DC rating while maintaining the original 0.394" lead spacing and similar physical footprint to the main part. The component is rated X1 for EMI/RFI suppression. Selection is appropriate when moderate voltage elevation is required without PCB layout modification. Height increases to 0.433" (11.00mm) from the original 0.358" (9.10mm).

B32022A3223M000 (Higher Voltage Alternative): This EPCOS-TDK Electronics part provides 1500V DC rating with Y2 classification. Physical dimensions match the R413I series (18.00mm length, 6.00mm width, 0.591" lead spacing). Selection is appropriate for applications requiring maximum voltage margin. This part maintains the highest inventory availability (103,149 units) among all substitutes.

All substitute parts maintain ROHS3 compliance, identical operating temperature range, and identical dielectric material composition. Selection should account for PCB layout constraints, particularly lead spacing and height requirements.

Frequently Asked Questions (FAQ)

Q: Can R463F222040N0M be used as a direct replacement for R463F222000N0M?

A: Yes. The R463F222040N0M is a parametric equivalent with identical capacitance (0.022 µF), tolerance (±20%), voltage ratings (630V DC, 310V AC), physical dimensions, lead spacing (0.394"), and operating temperature range. Both parts are KEMET R46 series components with Active product status and ROHS3 compliance.

Q: What is the primary difference between the main part and the R413I series substitutes?

A: The R413I series (R413I22200000M and R413I222000M1M) provides elevated voltage rating of 1000V DC compared to 630V DC in the main part. This increased voltage rating requires larger physical dimensions: 18.00mm length and 15.00mm lead spacing versus 13.00mm length and 10.00mm lead spacing in the original. Both R413I variants are KEMET R41 series components with AEC-Q200 automotive qualification.

Q: Can the B32911B3223M000 be used in the same PCB footprint as the R463F222000N0M?

A: The B32911B3223M000 maintains the same lead spacing (0.394" / 10.00mm) and length (13.00mm) as the main part, allowing use in the same PCB footprint. However, the width increases from 0.157" (4.00mm) to 0.197" (5.00mm), and height increases from 0.358" (9.10mm) to 0.433" (11.00mm). Physical clearance verification is required before substitution.

Q: What is the difference between R413I22200000M and R413I222000M1M?

A: Both parts are KEMET R41 series components with identical electrical specifications (0.022 µF, ±20%, 1000V DC, 300V AC). The primary difference is physical dimension: R413I22200000M has width of 0.295" (7.50mm) and height of 0.535" (13.60mm), while R413I222000M1M has width of 0.236" (6.00mm) and height of 0.476" (12.10mm). Both maintain 0.591" (15.00mm) lead spacing.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed (R463F222040N0M, R413I22200000M, R413I222000M1M, B32911B3223M000, and B32022A3223M000) maintain ROHS3 compliance status identical to the main part R463F222000N0M.

Q: Which substitute part provides the highest voltage rating?

A: The B32022A3223M000 (EPCOS-TDK Electronics) provides the highest voltage rating at 1500V DC. This part requires the largest physical footprint with 18.00mm length and 15.00mm lead spacing, and carries Y2 classification for EMI/RFI suppression applications.

Q: Can substitutes with different lead spacing be used interchangeably?

A: No. Lead spacing is a critical PCB layout parameter. The main part and B32911B3223M000 use 0.394" (10.00mm) lead spacing, while R413I series and B32022A3223M000 use 0.591" (15.00mm) lead spacing. PCB redesign is required when substituting between different lead spacing configurations.

Q: What is the operating temperature range for all listed parts?

A: All parts, including the main component and all substitutes, operate across the identical temperature range of -40°C to 110°C.

Q: Do all substitute parts use polypropylene dielectric material?

A: Yes. All substitute parts use identical dielectric material: Polypropylene (PP), Metallized. This ensures consistent electrical behavior and performance characteristics across all alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message