KEMET R413R3470JB00K Film Capacitor Equivalent & Substitute Parts

Part Overview

The KEMET R413R3470JB00K is a 0.47 µF film capacitor rated for 1000V DC operation with polypropylene metallized dielectric construction. This radial through-hole component is designed for automotive applications including EMI and RFI suppression. The part is currently Active in product status with 799 units available in inventory. Equivalent substitute parts may be required due to inventory availability, supply chain optimization, or procurement consolidation while maintaining identical electrical and mechanical performance.

Substiute Parts

R413R3470JB00K

KEMETIn Stock: 813R413R3470JB00K Datasheet

Current PartRFQ

R413R34700000K

KEMETIn Stock: 1333R413R34700000K Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the KEMET R413R3470JB00K is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match Exactly):

• Capacitance: 0.47 µF
• Tolerance: ±10%
• Voltage Rating - DC: 1000V (1kV)
• Voltage Rating - AC: 300V
• Dielectric Material: Polypropylene (PP), Metallized

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Through Hole
• Package / Case: Radial
• Lead Spacing: 1.083" (27.50mm)
• Termination: PC Pins

Environmental & Compliance Parameters (Must Match Exactly):

• Operating Temperature Range: -40°C to 110°C
• Ratings: AEC-Q200, X1, Y2
• RoHS Status: ROHS3 Compliant

The substitute part R413R34700000K meets all electrical, mechanical, and compliance requirements for direct substitution in the same circuit application.

Parameter Comparison

Engineering Selection Recommendations

The KEMET R413R34700000K is a parametric equivalent substitute for the R413R3470JB00K. Both parts are manufactured by KEMET within the R41 series and maintain identical electrical specifications, mechanical dimensions, and compliance certifications.

Selection Basis:

Both parts carry Active product status, confirming ongoing manufacturer support and availability. Both are ROHS3 Compliant and REACH Unaffected, meeting current environmental regulations. Both hold AEC-Q200 automotive qualification along with X1 and Y2 ratings, confirming suitability for automotive EMI/RFI suppression applications.

The substitute part R413R34700000K offers higher inventory availability (1240 units versus 799 units), providing supply chain flexibility without compromising electrical or mechanical performance. The identical lead spacing (1.083" / 27.50mm), radial through-hole configuration, and PC pin termination ensure direct PCB compatibility.

Frequently Asked Questions (FAQ)

Q: Can R413R34700000K be used as a direct replacement for R413R3470JB00K in automotive circuits?

A: Yes. Both parts are identical in capacitance (0.47 µF), voltage rating (1000V DC / 300V AC), dielectric material (polypropylene metallized), operating temperature range (-40°C to 110°C), and mechanical dimensions. Both hold AEC-Q200 automotive qualification and X1, Y2 ratings for EMI/RFI suppression applications.

Q: Are the physical dimensions and lead spacing identical?

A: Yes. Both parts have identical dimensions of 1.260" L x 0.709" W (32.00mm x 18.00mm), maximum seated height of 1.303" (33.10mm), and lead spacing of 1.083" (27.50mm). They use identical radial through-hole mounting with PC pin termination.

Q: Do both parts meet the same compliance standards?

A: Yes. Both R413R3470JB00K and R413R34700000K are ROHS3 Compliant, REACH Unaffected, and carry AEC-Q200 automotive qualification with X1 and Y2 ratings.

Q: What is the difference between these two part numbers?

A: The parts are electrically and mechanically identical. The difference lies in the part number suffix and inventory availability. R413R34700000K has higher stock availability (1240 units) compared to R413R3470JB00K (799 units).

Q: Can I mix these parts in the same production batch?

A: Yes. Since both parts are parametrically equivalent with identical electrical and mechanical specifications, they can be used interchangeably in the same circuit design and PCB layout without modification.