R413I222000M1K Film Capacitor Equivalent & Substitute Parts

Part Overview

The R413I222000M1K is a 0.022 µF metallized polypropylene film capacitor manufactured by KEMET, rated for 1000V DC operation. This radial through-hole component is designed for automotive applications including EMI and RFI suppression. The part maintains Active product status with full AEC-Q200, X1, and Y2 compliance certifications. Substitute parts are identified when inventory constraints, lead time requirements, or procurement logistics necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

R413I222000M1K

KEMETIn Stock: 1116R413I222000M1K Datasheet

Current PartRFQ

R413I22205000K

KEMETIn Stock: 1578R413I22205000K Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the R413I222000M1K is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part R413I22205000K qualifies as a parametric equivalent based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Capacitance value: 0.022 µF
• Tolerance: ±10%
• DC voltage rating: 1000V
• AC voltage rating: 300V
• Dielectric material: Polypropylene (PP), Metallized

Mechanical Parameters (Must Match Exactly):

• Mounting type: Through Hole
• Package configuration: Radial
• Physical dimensions: 18.00mm × 6.00mm
• Lead spacing: 15.00mm
• Termination style: PC Pins

Compliance & Certification (Must Match Exactly):

• AEC-Q200 automotive qualification
• X1 and Y2 safety ratings
• ROHS3 compliance status

Both parts belong to the KEMET R41 series and maintain identical operating temperature ranges (-40°C to +110°C). The substitute relationship is based solely on parametric equivalence; no functional or performance differences exist between the two part numbers.

Parameter Comparison

Engineering Selection Recommendations

Both R413I222000M1K and R413I22205000K are Active products manufactured by KEMET with full compliance to automotive and environmental standards. Selection between these parts should be based on availability and procurement lead times, as they are electrically and mechanically interchangeable.

Compliance Verification: Both parts maintain ROHS3 compliance, REACH Unaffected status, and full AEC-Q200 automotive qualification. Both carry X1 and Y2 safety ratings appropriate for EMI/RFI suppression applications. No compliance trade-offs exist between the two part numbers.

Inventory Considerations: R413I222000M1K: 1077 pcs available R413I22205000K: 1530 pcs available

Selection may be influenced by stock availability and supply chain requirements. Both parts are suitable for direct substitution in automotive EMI and RFI suppression circuits without circuit redesign or performance re-evaluation.

Frequently Asked Questions (FAQ)

Q: Can R413I22205000K be used as a direct replacement for R413I222000M1K?

A: Yes. Both parts are parametrically identical across all electrical specifications (0.022 µF, ±10%, 1000V DC, 300V AC), mechanical dimensions (18.00mm × 6.00mm, 15.00mm lead spacing), and compliance certifications (AEC-Q200, X1, Y2, ROHS3). No circuit modifications are required.

Q: Are there any differences in the radial package configuration between these parts?

A: No. Both parts use identical radial through-hole packaging with PC pin termination, 18.00mm length, 6.00mm width, and 15.00mm lead spacing. PCB layout and mounting procedures are identical.

Q: Do both parts operate across the same temperature range?

A: Yes. Both R413I222000M1K and R413I22205000K operate from -40°C to +110°C. No thermal performance differences exist.

Q: What is the difference between these two part numbers if they are identical?

A: The part numbers reflect different manufacturing batches or internal KEMET coding variations. From an engineering perspective, they are equivalent components with identical specifications and certifications.

Q: Are both parts suitable for automotive applications?

A: Yes. Both parts carry AEC-Q200 qualification and are rated for automotive EMI and RFI suppression applications. Both meet automotive reliability and compliance standards.

Q: Can these parts be used interchangeably in high-voltage circuits?

A: Yes. Both parts are rated for 1000V DC and 300V AC operation. They are suitable for high-voltage EMI suppression and filtering applications within these voltage specifications.