R161083000W Equivalent & Substitute Parts

Part Overview

The R161083000W is an N Type Connector Plug manufactured by Radiall USA, Inc., designed for coaxial RF applications requiring 50 Ohm impedance. This male pin connector features full crimp termination for both center contact and shield, supporting cable groups RG-142, RG-223, and RG-400. The connector is rated for frequencies up to 11 GHz and operates across a temperature range of -55°C to 155°C. The part is currently Active in product status with 1033 pieces available in bulk packaging. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when packaging requirements differ.

Substiute Parts

R161083000W

Radiall USA, Inc.In Stock: 1062R161083000W Datasheet

Current PartRFQ

R161083000

Radiall USA, Inc.In Stock: 1190R161083000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the R161083000W is determined by electrical and mechanical parameter equivalence. The primary substitute identified is R161083000, which maintains identical electrical specifications including 50 Ohm impedance, 11 GHz maximum frequency, crimp termination for both center contact and shield, and compatibility with RG-142, RG-223, and RG-400 cable groups. Both parts share identical operating temperature range (-55°C to 155°C), voltage rating (850 V), insertion loss (0.15 dB), and mating cycle rating (500 cycles). The key differentiator between these parts is packaging: R161083000W is supplied in bulk packaging, while R161083000 is supplied in box packaging. Both parts are manufactured by Radiall USA, Inc., maintain Active product status, and comply with ROHS3 requirements. The substitution is valid where packaging format does not impose system constraints.

Parameter Comparison

Engineering Selection Recommendations

Both R161083000W and R161083000 are Active products manufactured by Radiall USA, Inc., and comply with ROHS3 requirements. Selection between these parts should be based on packaging requirements and inventory availability. The R161083000W in bulk packaging is suitable for high-volume manufacturing operations where individual connector packaging is not required. The R161083000 in box packaging is appropriate for applications requiring individual unit packaging or smaller quantity orders. Both parts maintain identical electrical and mechanical specifications, ensuring functional interchangeability in 50 Ohm RF coaxial applications up to 11 GHz. The choice between these parts does not affect circuit performance, signal integrity, or system reliability when applied within specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Are R161083000W and R161083000 electrically identical?

A: Yes. Both parts are N Type male pin connectors with 50 Ohm impedance, crimp termination, 11 GHz maximum frequency, and identical material composition (brass body with gold-plated center contact and PTFE dielectric). Electrical performance, including insertion loss (0.15 dB) and operating temperature range (-55°C to 155°C), is identical.

Q: What is the primary difference between these two part numbers?

A: The primary difference is packaging format. R161083000W is supplied in bulk packaging, while R161083000 is supplied in box packaging. All electrical and mechanical specifications remain identical.

Q: Can R161083000 be used as a direct replacement for R161083000W?

A: Yes, R161083000 is a direct functional equivalent. Both parts are compatible with RG-142, RG-223, and RG-400 cable groups and support identical mating cycles (500) and voltage rating (850 V). Substitution is valid where packaging format does not impose system constraints.

Q: Are both parts RoHS compliant?

A: Yes. Both R161083000W and R161083000 are ROHS3 compliant.

Q: What cable types are compatible with these connectors?

A: Both connectors are compatible with RG-142, RG-223, and RG-400 coaxial cable groups. Crimp termination is used for both center contact and shield attachment.

Q: What is the maximum operating frequency for these connectors?

A: Both connectors are rated for frequencies up to 11 GHz, making them suitable for microwave and RF applications within this frequency range.

Q: Are there inventory differences between these parts?

A: Yes. R161083000W has 1033 pieces in stock, while R161083000 has 1112 pieces in stock. Inventory levels may change; current availability should be confirmed at time of order.