Equivalent & Substitute Parts for Recom Power R12P09D/P/R6.4

Part Overview

Recom Power R12P09D/P/R6.4 is an active DC DC converter in the isolated module category. It features dual outputs of +9V and -9V at 55mA each, with a 1W output power rating, and a 6.4 kV isolation voltage, intended for ITE (Commercial) and Medical applications. With ongoing supply status and regulatory compliance, substitution may be necessary in cases of supply interruptions, allocation, or specific procurement requirements.

Substiute Parts

R12P09D/P/R6.4

Recom PowerIn Stock: 1001R12P09D/P/R6.4 Datasheet

Current PartRFQ

MDD01M-09

MEAN WELL USA Inc.In Stock: 993MDD01M-09 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part selection is based strictly on the provided electrical and mechanical parameters for DC DC converters in the isolated module category. The substitute must match input voltage range, output voltage and current ratings, power, isolation voltage, number of outputs, mounting type, package dimensions, regulatory compliance, and product status. The substitute part listed, MEAN WELL USA Inc. MDD01M-09, aligns with these defined criteria.

Parameter Comparison

Engineering Selection Recommendations

Both R12P09D/P/R6.4 and MDD01M-09 are active status products with ROHS3 compliance, unaffected by REACH, and have unlimited moisture sensitivity level ratings. The provided certifications and compliance statuses are consistent between the main part and substitute, allowing for direct consideration in designs requiring regulatory assurance.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters when selecting a substitute for R12P09D/P/R6.4?
A: Substitution is determined by input voltage range, output voltages, output currents, isolation voltage, power rating, number of outputs, mounting type, package format, and regulatory compliance.

Q: Is the mechanical footprint compatible between R12P09D/P/R6.4 and MDD01M-09?
A: Both parts use the 7-SIP Module, 5 Leads package and maintain near-identical dimensions, allowing for compatible through-hole mounting.

Q: Can the substitute part be used for both ITE (Commercial) and Medical applications?
A: Both products specify medical application suitability, and the main part also lists ITE (Commercial). For identical applications, only the documented categories should be considered.

Q: Does the substitute MDD01M-09 meet RoHS, REACH, and MSL requirements?
A: Both R12P09D/P/R6.4 and MDD01M-09 are ROHS3 compliant, REACH unaffected, and have a moisture sensitivity level of 1 (Unlimited).

Q: Are there any differences in isolation voltage or output current to consider?
A: R12P09D/P/R6.4 has 6.4 kV isolation and 55mA output current per channel; MDD01M-09 provides 6 kV isolation and 56mA output current per channel. All differences are specified and must be evaluated for each design application's requirements.