R1200F-AP Equivalent & Substitute Parts

Part Overview

The R1200F-AP is a general-purpose rectifier diode manufactured by Micro Commercial Co, rated for 1200 V DC reverse voltage and 500 mA average rectified current in a DO-41 through-hole package. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design requirements and procurement needs. The substitute part RGP02-12E-E3/54 from Vishay General Semiconductor provides functional equivalence with identical electrical ratings and improved performance characteristics.

Substiute Parts

R1200F-AP

Micro Commercial CoIn Stock: 1138R1200F-AP Datasheet

Current PartRFQ

RGP02-12E-E3/54

Vishay General Semiconductor - Diodes DivisionIn Stock: 5832RGP02-12E-E3/54 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the R1200F-AP with RGP02-12E-E3/54 is based on strict equivalence of the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Voltage - DC Reverse (Vr) (Max): 1200 V (identical)
• Current - Average Rectified (Io): 500 mA (identical)
• Current - Reverse Leakage @ Vr: 5 µA @ 1200 V (identical)
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (identical)

Mechanical Equivalence Criteria:

• Mounting Type: Through Hole (identical)
• Package / Case: DO-204AL, DO-41, Axial (identical)

Compliance Equivalence:

• RoHS Status: ROHS3 Compliant (both parts)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (both parts)
• ECCN: EAR99 (both parts)
• HTSUS: 8541.10.0070 (both parts)

The substitute part RGP02-12E-E3/54 demonstrates improved performance characteristics including lower forward voltage drop (1.8 V @ 100 mA versus 2.4 V @ 500 mA) and faster reverse recovery time (300 ns versus 500 ns), while maintaining full backward compatibility with the original part's electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The RGP02-12E-E3/54 from Vishay General Semiconductor is a direct functional substitute for the obsolete R1200F-AP. Selection of this substitute part is supported by the following factors:

Electrical Compatibility: All critical electrical parameters match the original specification: 1200 V reverse voltage rating, 500 mA average rectified current, and 5 µA reverse leakage current. Fast recovery speed classification and reverse recovery time specifications are met or exceeded.

Mechanical Compatibility: Both parts utilize identical through-hole mounting and DO-204AL/DO-41 axial package configurations, ensuring direct pin-for-pin compatibility in existing circuit board layouts.

Compliance Status: The substitute part maintains ROHS3 compliance, EAR99 export classification, and unlimited moisture sensitivity level (MSL 1), matching the original part's regulatory and environmental certifications.

Product Availability: The substitute part carries active product status with confirmed inventory availability, addressing the procurement limitation of the obsolete R1200F-AP.

Performance Enhancement: The substitute part provides measurable improvements in forward voltage drop and reverse recovery time, resulting in reduced power dissipation and improved switching characteristics in high-frequency applications.

Frequently Asked Questions (FAQ)

Q: Can RGP02-12E-E3/54 be used as a direct replacement for R1200F-AP in existing designs?

A: Yes. The RGP02-12E-E3/54 meets all electrical and mechanical specifications of the R1200F-AP. Both parts are rated for 1200 V reverse voltage, 500 mA average rectified current, and utilize identical DO-41 through-hole axial packages. Pin-for-pin compatibility is confirmed.

Q: What are the key differences between these two parts?

A: The primary differences are product status and performance characteristics. The R1200F-AP is obsolete, while RGP02-12E-E3/54 is active. The Vishay part offers improved forward voltage characteristics (1.8 V @ 100 mA versus 2.4 V @ 500 mA), faster reverse recovery time (300 ns versus 500 ns), and extended operating temperature range (-65°C to 175°C versus -55°C to 150°C).

Q: Are there any package compatibility concerns?

A: No. Both parts use the DO-204AL/DO-41 axial through-hole package. Physical dimensions and pin configurations are identical, allowing direct substitution without circuit board modifications.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both the R1200F-AP and RGP02-12E-E3/54 are ROHS3 compliant, carry EAR99 export classification, and have unlimited moisture sensitivity level (MSL 1). HTSUS tariff classification is identical for both parts.

Q: What is the significance of the improved reverse recovery time in the substitute part?

A: The RGP02-12E-E3/54 features a reverse recovery time of 300 ns compared to 500 ns in the R1200F-AP. This improvement reduces switching losses and electromagnetic interference in high-frequency rectification applications, particularly in power supply and converter circuits.

Q: Can the substitute part handle the same current and voltage ratings?

A: Yes. The RGP02-12E-E3/54 is rated for identical maximum ratings: 1200 V DC reverse voltage and 500 mA average rectified current. Reverse leakage current specification is also identical at 5 µA @ 1200 V.

Q: Is the substitute part available in the same packaging format?

A: Yes. The RGP02-12E-E3/54 is supplied in Cut Tape (CT) packaging in the DO-204AL (DO-41) axial configuration, matching the through-hole mounting requirements of the original R1200F-AP.