R114664100 SMB Right Angle Jack Receptacle Coaxial Connector

Part Overview

The R114664100 is an SMB connector jack with male pin configuration, designed for 50 Ohm RF applications. This surface mount, right angle solder connector operates across frequencies up to 4 GHz and is manufactured by Radiall USA, Inc. The component maintains Active product status and is RoHS3 compliant. Equivalent substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical specifications.

Substiute Parts

R114664100

Radiall USA, Inc.In Stock: 686R114664100 Datasheet

Current PartRFQ

131-3711-301

Cinch Connectivity SolutionsIn Stock: 1112131-3711-301 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the R114664100 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic requires exact matching of the following parameters:

• Connector Style: SMB
• Connector Type: Jack, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Surface Mount, Right Angle
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 4 GHz
• Operating Temperature Range: -65°C ~ 165°C
• Voltage Rating: 335 V
• Mating Cycles: 500
• Fastening Type: Snap-On
• Number of Ports: 1
• Dielectric Material: Polytetrafluoroethylene (PTFE)
• Center Contact Material: Brass
• Body Material: Brass
• Body Finish: Gold
• Center Contact Plating: Gold

The part 131-3711-301 manufactured by Cinch Connectivity Solutions meets all specified parameters and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the R114664100 and 131-3711-301 are Active status components with full compliance to applicable RoHS standards. The R114664100 carries RoHS3 compliance, while the 131-3711-301 carries RoHS compliance. Selection between these parts is determined by specific regulatory requirements of the end application. Both components are suitable for 50 Ohm RF applications operating up to 4 GHz with identical electrical performance characteristics and mechanical interface specifications. The choice between manufacturers should be based on supply availability, lead time requirements, and procurement policy.

Frequently Asked Questions (FAQ)

Q: Can the 131-3711-301 be used as a direct replacement for the R114664100?

A: Yes. The 131-3711-301 meets all electrical and mechanical parameters specified for the R114664100, including impedance, frequency range, operating temperature, voltage rating, and mating cycle specifications. Both components are SMB jack connectors with male pins, surface mount right angle solder termination, and identical material composition.

Q: Are there differences in RoHS compliance between these parts?

A: The R114664100 is RoHS3 compliant, while the 131-3711-301 is RoHS compliant. Applications subject to RoHS3 requirements must use the R114664100. Applications requiring only RoHS compliance can use either part.

Q: What is the moisture sensitivity level for each part?

A: The R114664100 has a Moisture Sensitivity Level (MSL) listed as Not Applicable. The 131-3711-301 has an MSL of 1 (Unlimited). Both classifications indicate minimal moisture sensitivity for storage and handling.

Q: Are the packaging quantities the same?

A: Both parts are supplied in Bulk packaging. The R114664100 has 647 pieces in stock, while the 131-3711-301 has 1102 pieces in stock. Packaging quantity per unit order follows standard bulk specifications for each manufacturer.

Q: What is the maximum frequency rating for these connectors?

A: Both the R114664100 and 131-3711-301 are rated for a maximum frequency of 4 GHz, making them suitable for RF applications within this bandwidth.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both connectors operate across the temperature range of -65°C to 165°C, supporting applications requiring extended temperature performance.

Q: What is the voltage rating for these SMB connectors?

A: Both the R114664100 and 131-3711-301 are rated for 335 V, providing adequate voltage handling for standard RF circuit applications.

Q: How many mating cycles are these connectors rated for?

A: Both connectors are rated for 500 mating cycles, defining the expected mechanical durability for repeated connection and disconnection operations.