Equivalent & Substitute Parts for R114003000W

Part Overview

The R114003000W is an SMB connector plug manufactured by Radiall USA, Inc., designed for coaxial RF applications. This female socket connector features solder contact termination and clamp-type shield termination, rated for 50 Ohms impedance and compatible with RG-178 and RG-196 cable groups. The connector operates across a temperature range of -55°C to 100°C with a maximum frequency rating of 4 GHz and supports 500 mating cycles. The part is currently active and ROHS3 compliant. Substitute parts are identified to address packaging variations and operational parameter differences while maintaining core electrical and mechanical compatibility.

Substiute Parts

R114003000W

Radiall USA, Inc.In Stock: 1064R114003000W Datasheet

Current PartRFQ

R114003000

Radiall USA, Inc.In Stock: 866R114003000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between R114003000W and R114003000 is based on identical electrical and mechanical specifications across all critical parameters that define connector functionality and compatibility. Both parts share the same connector style (SMB), connector type (Plug, Female Socket), contact and shield termination methods (Solder and Clamp), impedance rating (50 Ohms), mounting configuration (Free Hanging In-Line), cable compatibility (RG-178, RG-196), fastening mechanism (Snap-On), frequency rating (4 GHz maximum), operating temperature range (-55°C to 100°C), and mating cycle rating (500 cycles).

The primary distinction between these parts is packaging format and voltage rating. R114003000W is supplied in bulk packaging with a 250 V voltage rating, while R114003000 is supplied in box packaging with a 335 V voltage rating. Both parts are manufactured by Radiall USA, Inc., maintain active product status, and comply with ROHS3 requirements.

Substitution is valid when packaging requirements and voltage specifications align with application demands.

Parameter Comparison

Engineering Selection Recommendations

Both R114003000W and R114003000 are active products manufactured by Radiall USA, Inc., and maintain full ROHS3 compliance. Selection between these parts depends on two specific criteria: packaging requirements and voltage specification.

Packaging Consideration: R114003000W is supplied in bulk packaging, suitable for high-volume production environments or applications requiring loose component handling. R114003000 is supplied in box packaging, appropriate for standard inventory management and component traceability requirements.

Voltage Rating Consideration: R114003000W is rated for 250 V operation, while R114003000 is rated for 335 V operation. Applications requiring voltage ratings above 250 V must use R114003000. Applications operating at or below 250 V may use either part based on packaging preference.

All other electrical and mechanical parameters are identical between these parts, including impedance, frequency rating, temperature range, mating cycle capability, and material composition. Both parts are suitable for RG-178 and RG-196 cable integration in SMB connector applications.

Frequently Asked Questions (FAQ)

Q: Can R114003000 be used as a direct replacement for R114003000W?

A: R114003000 can replace R114003000W when the application voltage requirement does not exceed 335 V and box packaging is acceptable. The higher voltage rating of R114003000 (335 V versus 250 V) provides additional operational margin. All other electrical and mechanical specifications are identical.

Q: Can R114003000W be used as a direct replacement for R114003000?

A: R114003000W can replace R114003000 only when the application voltage requirement does not exceed 250 V and bulk packaging is acceptable. The lower voltage rating of R114003000W may not be suitable for applications designed for the higher 335 V rating of R114003000.

Q: What is the primary difference between these two parts?

A: The primary differences are packaging format (bulk versus box) and voltage rating (250 V versus 335 V). All connector specifications, including impedance, frequency rating, temperature range, and cable compatibility, are identical.

Q: Are both parts ROHS3 compliant?

A: Yes, both R114003000W and R114003000 are ROHS3 compliant and manufactured by Radiall USA, Inc.

Q: What cable types are compatible with both parts?

A: Both parts are compatible with RG-178 and RG-196 cable groups and support 50 Ohms impedance.

Q: What is the maximum operating frequency for both parts?

A: Both parts support a maximum frequency rating of 4 GHz.

Q: What is the operating temperature range for both parts?

A: Both parts operate across a temperature range of -55°C to 100°C.

Q: How many mating cycles do both parts support?

A: Both parts support 500 mating cycles.