MCX Connector Plug R113083000W Equivalent & Substitute Parts

Part Overview

The R113083000W is an MCX straight plug crimp connector manufactured by Radiall USA, Inc., designed for coaxial RF applications. This male pin connector operates at 50 ohms impedance with a maximum frequency rating of 6 GHz and supports free hanging (in-line) mounting configurations. The connector features crimp termination for both center contact and shield, with a snap-on fastening mechanism. The part is currently active in production and available in bulk packaging. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when packaging requirements differ.

Substiute Parts

R113083000W

Radiall USA, Inc.In Stock: 866R113083000W Datasheet

Current PartRFQ

R113083000

Radiall USA, Inc.In Stock: 901R113083000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The R113083000W and R113083000 are classified as parametric equivalents based on identical electrical and mechanical specifications across all critical substitution criteria. Both connectors maintain the same MCX connector style, male pin configuration, crimp termination method, 50-ohm impedance, free hanging mounting type, RG-316DS cable group compatibility, snap-on fastening, 6 GHz maximum frequency, single port configuration, and identical material specifications including beryllium copper center contact, brass body with gold finish, and PTFE dielectric.

The primary distinction between these parts is packaging format: R113083000W is supplied in bulk packaging, while R113083000 is supplied in box packaging. Both parts are active products manufactured by Radiall USA, Inc., and both comply with the same electrical and mechanical standards for MCX RF connectors.

Substitution between these part numbers is valid when the application requirements do not impose specific packaging constraints. The electrical performance, mechanical compatibility, and RF characteristics are identical across both configurations.

Parameter Comparison

Engineering Selection Recommendations

Both R113083000W and R113083000 are active production parts from Radiall USA, Inc., with identical electrical and mechanical specifications. Selection between these two part numbers should be based solely on packaging requirements for the application or supply chain logistics.

The R113083000W in bulk packaging is suitable for high-volume manufacturing environments where individual connector packaging is not required. The R113083000 in box packaging is appropriate for applications requiring individual unit packaging or when box packaging aligns with inventory management procedures.

Both parts comply with EAR99 export classification and HTSUS code 8536.69.4010. The substitute part R113083000 carries RoHS3 compliance certification. All electrical performance characteristics, including impedance, frequency response, temperature operating range, and mating cycle ratings, are identical between the two configurations.

Frequently Asked Questions (FAQ)

Q: Are R113083000W and R113083000 electrically identical?

A: Yes. Both connectors maintain identical electrical specifications including 50-ohm impedance, 6 GHz maximum frequency, -55°C to 155°C operating temperature range, 335 V and 170 V voltage ratings respectively, and 500 mating cycles. All material compositions, plating specifications, and dielectric properties are identical.

Q: What is the only difference between R113083000W and R113083000?

A: The packaging format. R113083000W is supplied in bulk packaging, while R113083000 is supplied in box packaging. All connector specifications and performance characteristics are identical.

Q: Can I substitute R113083000 for R113083000W in my design?

A: Yes, provided that your application does not impose specific packaging requirements. The connectors are mechanically and electrically interchangeable. Verify that box packaging is acceptable for your supply chain and assembly processes.

Q: Are both parts currently available?

A: Both parts are active production items. R113083000W has 818 pieces in stock, and R113083000 has 799 pieces in stock as of the reference date.

Q: What cable types are compatible with these connectors?

A: Both connectors are designed for RG-316DS cable group compatibility. The crimp termination method applies to both center contact and shield connections.

Q: Do these connectors require any special handling or storage?

A: Both parts are classified as Not Applicable for Moisture Sensitivity Level (MSL), indicating no special moisture control storage requirements during handling or storage.