R1114Q301A-TR-FE Equivalent & Substitute Parts

Part Overview

The R1114Q301A-TR-FE is a linear voltage regulator IC manufactured by Nisshinbo Micro Devices Inc., classified as a Power Management (PMIC) component. This device functions as a positive fixed output voltage regulator delivering 3V at 150mA output current with integrated enable control and over-current protection features. The part is actively produced and maintained in inventory, with RoHS compliance certification. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

R1114Q301A-TR-FE

Nisshinbo Micro Devices Inc.In Stock: 811R1114Q301A-TR-FE Datasheet

Current PartRFQ

R1180Q301B-TR-FE

Nisshinbo Micro Devices Inc.In Stock: 12504R1180Q301B-TR-FE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the R1114Q301A-TR-FE are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are defined by the following key parameters:

Electrical Equivalence Requirements:

• Fixed output voltage of 3V
• Output current capability of 150mA
• Maximum input voltage of 6V
• Positive output configuration
• Single regulator output
• Enable control feature
• Over-current protection feature
• Operating temperature range of -40°C to 85°C

Mechanical Equivalence Requirements:

• Surface mount mounting type
• SC-82A / SOT-343 package configuration
• Tape & Reel (TR) packaging format

Compliance Requirements:

• RoHS compliance status
• EAR99 export classification
• HTSUS code 8542.39.0001

The R1180Q301B-TR-FE meets all electrical and mechanical equivalence criteria, enabling direct substitution in applications requiring the R1114Q301A-TR-FE.

Parameter Comparison

Engineering Selection Recommendations

The R1180Q301B-TR-FE serves as a direct parametric equivalent to the R1114Q301A-TR-FE for applications requiring a 3V, 150mA linear voltage regulator in SC-82A / SOT-343 surface mount packaging. Both devices maintain identical output voltage, output current, input voltage maximum, operating temperature range, control features, and protection features.

Selection Basis:

The R1180Q301B-TR-FE demonstrates superior quiescent current performance (1.5 µA versus 95 µA), resulting in lower standby power consumption. The maximum voltage dropout specification of 0.4V at 150mA is marginally higher than the R1114Q301A-TR-FE (0.35V), remaining within acceptable tolerance for most 3V regulated supply applications.

Both parts maintain active product status and comply with RoHS regulations. The R1180Q301B-TR-FE carries ROHS3 compliance certification, representing the current regulatory standard. Both devices are classified under EAR99 export control and HTSUS code 8542.39.0001.

Selection between these parts should be based on application-specific requirements for quiescent current performance and dropout voltage tolerance, with both parts providing equivalent functional capability in the specified package configuration.

Frequently Asked Questions (FAQ)

Q: Can the R1180Q301B-TR-FE replace the R1114Q301A-TR-FE in existing designs?

A: Yes. Both devices deliver identical 3V fixed output voltage at 150mA output current with matching input voltage ratings, operating temperature ranges, enable control, and over-current protection. The SC-82A / SOT-343 package configuration is identical, enabling direct board-level substitution.

Q: What is the difference in quiescent current between these parts?

A: The R1114Q301A-TR-FE draws 95 µA quiescent current, while the R1180Q301B-TR-FE draws 1.5 µA. The R1180Q301B-TR-FE provides significantly lower standby power consumption, beneficial for battery-powered or low-power standby applications.

Q: Are there differences in voltage dropout performance?

A: The R1114Q301A-TR-FE specifies 0.35V maximum dropout at 150mA, while the R1180Q301B-TR-FE specifies 0.4V maximum dropout at 150mA. Both values remain within acceptable range for 3V regulated supply applications. Applications with tight input voltage margins should verify compatibility with the higher dropout specification.

Q: Do both parts use the same packaging format?

A: Yes. Both the R1114Q301A-TR-FE and R1180Q301B-TR-FE use SC-82A / SOT-343 surface mount packages supplied in Tape & Reel (TR) format. No PCB layout or assembly process modifications are required for substitution.

Q: What is the RoHS compliance status for each part?

A: The R1114Q301A-TR-FE carries RoHS Compliant certification. The R1180Q301B-TR-FE carries ROHS3 Compliant certification, representing the current regulatory standard. Both parts meet RoHS requirements for restricted substance elimination.

Q: Are both parts actively manufactured?

A: Yes. Both the R1114Q301A-TR-FE and R1180Q301B-TR-FE maintain active product status with Nisshinbo Micro Devices Inc. Both parts are available in production quantities.

Q: What control and protection features are included?

A: Both devices include enable control functionality for output voltage regulation control and over-current protection for fault condition management. These features are identical across both part numbers.