QTS-050-03-L-D-A-TR Equivalent & Substitute Parts

Part Overview

The QTS-050-03-L-D-A-TR is a 100-position rectangular connector header manufactured by Samtec Inc. as part of the Q Strip® QTS series. This surface mount connector features outer shroud contacts with gold plating and is designed for high-density interconnect applications. The part is currently active in production with 787 units in stock. Substitute parts are identified when packaging or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

QTS-050-03-L-D-A-TR

Samtec Inc.In Stock: 855QTS-050-03-L-D-A-TR Datasheet

Current PartRFQ

QTS-050-03-L-D-A

Samtec Inc.In Stock: 999QTS-050-03-L-D-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The QTS-050-03-L-D-A-TR has one identified substitute part: QTS-050-03-L-D-A. Both parts are functionally equivalent based on the following critical parameters that determine substitutability:

• Number of Positions: 100
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 10.0µin (0.25µm)
• Height Above Board: 0.404" (10.27mm)
• Mated Stacking Heights: 11mm
• Features: Board Guide, Ground Bus (Plane)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The only difference between these parts is the packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is supplied in Tray format.

Parameter Comparison

Engineering Selection Recommendations

Both QTS-050-03-L-D-A-TR and QTS-050-03-L-D-A are active production parts with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and inventory availability. The Tape & Reel format (TR) is suitable for automated pick-and-place assembly operations, while the Tray format accommodates manual assembly or alternative handling processes. Both parts meet the same regulatory and environmental standards.

Frequently Asked Questions (FAQ)

Q: Can QTS-050-03-L-D-A be used as a direct replacement for QTS-050-03-L-D-A-TR?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only. QTS-050-03-L-D-A-TR uses Tape & Reel packaging, while QTS-050-03-L-D-A uses Tray packaging. Component-level performance and board-level compatibility are identical.

Q: What is the primary consideration when choosing between these two parts?

A: Packaging format determines the selection. Tape & Reel (TR) format is optimized for automated assembly lines with pick-and-place equipment. Tray format is used for manual assembly, kit builds, or alternative handling methods. Verify your assembly process requirements before selecting.

Q: Are there any compliance or environmental differences between these parts?

A: No. Both parts carry ROHS3 compliance and have identical Moisture Sensitivity Level (MSL) ratings of 1 (Unlimited). They meet the same regulatory and environmental standards.

Q: Does packaging format affect the component's electrical performance?

A: No. Packaging is a logistics and assembly consideration only. Electrical specifications, contact resistance, signal integrity, and all functional parameters are identical between the two parts.

Q: What is the pitch specification for this connector?

A: The pitch is 0.025" (0.64mm), indicating the center-to-center distance between adjacent contact positions in the 100-position header.