QTS-050-02-F-D-A-TR Equivalent & Substitute Parts

Part Overview

The QTS-050-02-F-D-A-TR is a 100-position connector header from Samtec Inc.'s Q Strip® QTS series, designed for surface mount applications. This rectangular connector features outer shroud contacts with gold plating and is classified as Active product status. Alternative packaging configurations of this connector are available to accommodate different procurement and assembly requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

QTS-050-02-F-D-A-TR

Samtec Inc.In Stock: 1128QTS-050-02-F-D-A-TR Datasheet

Current PartRFQ

QTS-050-02-F-D-A

Samtec Inc.In Stock: 1177QTS-050-02-F-D-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The QTS-050-02-F-D-A-TR can be substituted with QTS-050-02-F-D-A based on identical electrical and mechanical parameters. The substitution is valid because both parts share the following critical specifications:

• 100-position connector configuration
• 0.025" (0.64mm) pitch spacing
• 2-row arrangement
• Header with outer shroud contacts
• Surface mount mounting type
• Gold contact finish at 3.00µin thickness
• 8mm mated stacking height
• 0.278" (7.06mm) height above board
• Board guide and ground bus features
• ROHS3 compliance
• MSL 1 rating
• REACH unaffected status

The only difference between these parts is the packaging format: QTS-050-02-F-D-A-TR is supplied in Tape & Reel (TR) format, while QTS-050-02-F-D-A is supplied in Tray format.

Parameter Comparison

Engineering Selection Recommendations

Both QTS-050-02-F-D-A-TR and QTS-050-02-F-D-A are Active status products from Samtec Inc. and maintain full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on packaging requirements and assembly process specifications. The Tape & Reel format (QTS-050-02-F-D-A-TR) is suitable for automated pick-and-place assembly operations, while the Tray format (QTS-050-02-F-D-A) accommodates manual assembly or alternative handling processes. Both configurations deliver identical electrical performance and mechanical fit.

Frequently Asked Questions (FAQ)

Q: Can QTS-050-02-F-D-A be used in place of QTS-050-02-F-D-A-TR?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only. QTS-050-02-F-D-A uses Tray packaging while QTS-050-02-F-D-A-TR uses Tape & Reel packaging. Selection depends on assembly process requirements.

Q: What is the pitch specification for this connector?

A: The pitch is 0.025" (0.64mm), defining the center-to-center spacing between adjacent contact positions.

Q: Are both parts RoHS compliant?

A: Yes. Both QTS-050-02-F-D-A-TR and QTS-050-02-F-D-A are ROHS3 compliant and REACH unaffected.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have MSL 1 rating, indicating unlimited shelf life without moisture control requirements.

Q: How many contact positions does this connector provide?

A: This connector provides 100 positions arranged in 2 rows with 0.025" pitch spacing.

Q: What is the mated stacking height?

A: The mated stacking height is 8mm, with a height above board of 0.278" (7.06mm).