QTLP610C2TR Equivalent & Substitute Parts

Part Overview

The QTLP610C2TR is a red 630nm LED indication component manufactured by onsemi, configured as a discrete 2V surface mount right-angle device in a 2-SMD, No Lead package. This part is classified as obsolete, making identification of equivalent alternatives essential for ongoing production support and design continuity. The component delivers 7 millicandela output with a 120° viewing angle and is suitable for indicator applications requiring compact form factors and right-angle mounting configurations.

Substiute Parts

QTLP610C2TR

onsemiIn Stock: 2871QTLP610C2TR Datasheet

Current PartRFQ

QTLP610C2TR

onsemiIn Stock: 2871QTLP610C2TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the QTLP610C2TR is determined by strict alignment across the following critical parameters:

• Red color specification (630nm dominant wavelength, 635nm peak wavelength)
• Forward voltage of 2V at 20mA test current
• Millicandela output of 7mcd
• 120° viewing angle
• Rectangle with domed top lens configuration
• 2.00mm x 1.00mm lens dimensions
• Surface mount right-angle mounting type
• 2-SMD, No Lead package configuration
• Maximum height of 1.10mm
• Overall dimensions of 3.00mm L x 2.00mm W

Only components matching all specified parameters across electrical performance, optical characteristics, and mechanical form factor qualify as direct equivalents.

Parameter Comparison

Engineering Selection Recommendations

The QTLP610C2TR is classified as obsolete. Component selection must account for product status and regulatory compliance. The part carries REACH Unaffected status and MSL Level 1 (Unlimited) moisture sensitivity rating, indicating no special handling requirements during storage or assembly.

When sourcing alternatives, verify that substitute components maintain identical electrical performance specifications (2V forward voltage, 20mA test current, 7mcd output) and mechanical compatibility (right-angle surface mount configuration, 2-SMD No Lead package, 3.00mm x 2.00mm x 1.10mm maximum dimensions). Compliance certifications and regulatory status must be confirmed with the supplier for the specific substitute part selected.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the QTLP610C2TR?

A: A valid substitute must match all specified parameters: red color (630nm dominant wavelength), 2V forward voltage, 20mA test current, 7mcd millicandela rating, 120° viewing angle, rectangle domed-top lens, 2.00mm x 1.00mm lens dimensions, surface mount right-angle mounting, 2-SMD No Lead package, and 3.00mm x 2.00mm x 1.10mm maximum dimensions.

Q: Can I use a different lens style or size?

A: No. The lens style (rectangle with domed top) and lens dimensions (2.00mm x 1.00mm) are critical parameters that determine optical performance and mechanical fit. Deviations from these specifications are not acceptable substitutions.

Q: Does the right-angle mounting type affect compatibility?

A: Yes. The right-angle surface mount configuration is a mandatory specification. Standard vertical-mount LEDs or alternative mounting orientations are not compatible with applications designed for this component.

Q: What is the significance of the 2-SMD, No Lead package?

A: The 2-SMD, No Lead package defines the physical footprint and soldering interface. This package type is essential for PCB layout compatibility and assembly process requirements. Alternative package configurations cannot be substituted.

Q: Are there any handling or storage considerations?

A: The QTLP610C2TR carries MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard component storage practices apply without special environmental controls.