QTH-060-03-F-D-A-TR Equivalent & Substitute Parts

Part Overview

The QTH-060-03-F-D-A-TR is a 120-position rectangular connector header manufactured by Samtec Inc. as part of the Q Strip® QTH series. This surface mount connector features outer shroud contacts with gold plating and is designed for high-density interconnect applications requiring board-level connectivity. The part is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when packaging or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

QTH-060-03-F-D-A-TR

Samtec Inc.In Stock: 984QTH-060-03-F-D-A-TR Datasheet

Current PartRFQ

QTH-060-03-F-D-A

Samtec Inc.In Stock: 2259QTH-060-03-F-D-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the QTH-060-03-F-D-A-TR is determined by strict equivalence across all electrical and mechanical parameters. The primary substitution criterion is packaging format. The QTH-060-03-F-D-A-TR is supplied in Tape & Reel (TR) packaging, while the identified substitute QTH-060-03-F-D-A is supplied in Tray packaging. Both parts share identical specifications across the following critical parameters:

• Number of positions: 120
• Pitch: 0.020" (0.50mm)
• Number of rows: 2
• Connector type: Header, Outer Shroud Contacts
• Mounting type: Surface Mount
• Contact finish: Gold at 3.00µin thickness
• Height above board: 0.404" (10.27mm)
• Mated stacking height: 11mm
• Features: Board Guide, Ground Bus (Plane)
• RoHS3 compliance
• MSL 1 rating

The only difference between these parts is the packaging method, which does not affect electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the QTH-060-03-F-D-A-TR and QTH-060-03-F-D-A are active production parts with identical electrical and mechanical specifications. Selection between these parts is based on packaging requirements and inventory availability rather than functional differences.

The QTH-060-03-F-D-A-TR in Tape & Reel packaging is suitable for high-volume automated assembly processes where continuous reel feeding is required. The QTH-060-03-F-D-A in Tray packaging is suitable for lower-volume applications or manual assembly workflows.

Both parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard PCB assembly processes and storage conditions without moisture bake-out requirements.

Frequently Asked Questions (FAQ)

Q: Can QTH-060-03-F-D-A be used as a direct replacement for QTH-060-03-F-D-A-TR?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tray versus Tape & Reel). Functional performance and PCB compatibility are unchanged.

Q: What is the difference between Tape & Reel and Tray packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place equipment. Tray packaging supplies components in a static-dissipative tray suitable for manual handling or lower-volume assembly. Both packaging formats contain the same component.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical RoHS3 compliance and MSL 1 ratings. Storage and handling requirements are equivalent.

Q: Which part should be selected for high-volume production?

A: The QTH-060-03-F-D-A-TR (Tape & Reel) is optimized for high-volume automated assembly. The QTH-060-03-F-D-A (Tray) is suitable when Tape & Reel is unavailable or when production volume does not justify reel-based feeding.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts feature 120 positions, 0.020" pitch, 2-row configuration, gold contact finish at 3.00µin thickness, and identical mechanical dimensions. Electrical performance is equivalent.