QTH-060-01-H-D-A-TR Equivalent & Substitute Parts

Part Overview

The QTH-060-01-H-D-A-TR is a 120-position rectangular connector header manufactured by Samtec Inc. as part of the Q Strip® QTH series. This surface mount component features outer shroud contacts with gold plating and is designed for high-density interconnect applications. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when packaging or distribution format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

QTH-060-01-H-D-A-TR

Samtec Inc.In Stock: 1101QTH-060-01-H-D-A-TR Datasheet

Current PartRFQ

QTH-060-01-H-D-A

Samtec Inc.In Stock: 1009QTH-060-01-H-D-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the QTH-060-01-H-D-A-TR is determined by the following critical parameters that must remain identical:

• Number of Positions: 120
• Pitch: 0.020" (0.50mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)
• Height Above Board: 0.160" (4.06mm)
• Mated Stacking Height: 5mm
• Features: Board Guide, Ground Bus (Plane)
• Base Product Number: QTH-060
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute differs only in packaging format (Tape & Reel versus Tray), which does not affect electrical or mechanical performance in the application.

Parameter Comparison

Engineering Selection Recommendations

Both QTH-060-01-H-D-A-TR and QTH-060-01-H-D-A maintain Active product status with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements:

The QTH-060-01-H-D-A-TR in Tape & Reel packaging is suitable for high-volume automated assembly operations where reel-fed component handling is standard.

The QTH-060-01-H-D-A in Tray packaging is suitable for lower-volume production, manual assembly, or applications where tray-based component management is preferred.

Both parts satisfy ROHS3 compliance requirements and carry unlimited moisture sensitivity rating (MSL 1), eliminating environmental storage constraints. The identical ECCN and HTSUS classifications confirm regulatory equivalence for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can QTH-060-01-H-D-A be used as a direct replacement for QTH-060-01-H-D-A-TR?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tray versus Tape & Reel). Direct substitution is valid provided assembly equipment can accommodate the alternative packaging format.

Q: Does packaging format affect component performance or reliability?

A: No. Packaging format affects only handling, storage, and assembly logistics. Electrical performance, mechanical fit, and reliability characteristics are identical between the two parts.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, MSL 1 rating, ECCN classification (EAR99), and HTSUS code (8536.69.4040).

Q: What determines whether a part can substitute for QTH-060-01-H-D-A-TR?

A: Substitution requires matching all electrical and mechanical parameters: 120 positions, 0.020" pitch, 2 rows, surface mount configuration, gold contact finish at 30.0µin thickness, 0.160" height above board, 5mm mated stacking height, board guide and ground bus features, and ROHS3 compliance with MSL 1 rating.

Q: Can parts from other manufacturers substitute for this Samtec connector?

A: Substitution is limited to parts within the Samtec Q Strip® QTH series that maintain identical electrical and mechanical specifications. Cross-manufacturer substitution requires verification of all specified parameters.