QTE-060-03-F-D-A-TR Equivalent & Substitute Parts

Part Overview

The QTE-060-03-F-D-A-TR is a 120-position rectangular connector header manufactured by Samtec Inc. as part of the Q Strip® QTE series. This surface mount connector features outer shroud contacts with gold plating and is designed for applications requiring high-density interconnection with board-level guidance and ground bus plane integration. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified based on identical electrical and mechanical specifications with variations limited to packaging configuration.

Substiute Parts

QTE-060-03-F-D-A-TR

Samtec Inc.In Stock: 1048QTE-060-03-F-D-A-TR Datasheet

Current PartRFQ

QTE-060-03-F-D-A

Samtec Inc.In Stock: 873QTE-060-03-F-D-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the QTE-060-03-F-D-A-TR is determined by strict equivalence across the following critical parameters:

• Number of positions: 120
• Pitch specification: 0.031" (0.80mm)
• Number of rows: 2
• Connector type: Header with outer shroud contacts
• Mounting type: Surface mount
• Contact finish: Gold at 3.00µin thickness
• Height above board: 0.404" (10.27mm)
• Mated stacking height: 11mm
• Features: Board guide and ground bus plane integration
• Compliance: RoHS3 and MSL 1 rating

The identified substitute part QTE-060-03-F-D-A differs only in packaging configuration (Tray versus Tape & Reel). All electrical, mechanical, and environmental specifications remain identical.

Parameter Comparison

Engineering Selection Recommendations

Both the QTE-060-03-F-D-A-TR and QTE-060-03-F-D-A maintain Active product status with identical RoHS3 compliance and MSL 1 certification. Selection between these parts is determined solely by packaging requirements and supply chain logistics. The Tape & Reel (TR) packaging of the main part supports automated assembly processes, while the Tray packaging of the substitute part accommodates manual assembly or alternative handling workflows. Both parts meet all regulatory and environmental compliance requirements for equivalent functional performance.

Frequently Asked Questions (FAQ)

Q: Can QTE-060-03-F-D-A be used as a direct replacement for QTE-060-03-F-D-A-TR?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Tray. Functional performance, pin configuration, contact specifications, and compliance ratings are equivalent.

Q: What is the significance of the packaging difference between TR and non-TR versions?

A: Tape & Reel (TR) packaging is optimized for high-volume automated surface mount assembly. Tray packaging is used for manual assembly, lower-volume production, or alternative handling methods. The connector itself is identical in both formats.

Q: Are both parts RoHS3 compliant?

A: Yes. Both QTE-060-03-F-D-A-TR and QTE-060-03-F-D-A carry full RoHS3 compliance certification.

Q: What does MSL 1 rating mean for these connectors?

A: MSL 1 indicates unlimited moisture sensitivity level, meaning the parts do not require special moisture control or baking procedures prior to assembly. These connectors can be stored and handled under standard environmental conditions.

Q: Are the contact finish specifications identical between both parts?

A: Yes. Both parts feature gold contact finish at 3.00µin (0.076µm) thickness, ensuring equivalent electrical performance and corrosion resistance.

Q: Can these parts be used interchangeably in the same PCB design?

A: Yes. Both parts have identical mechanical dimensions, pitch, number of positions, and mounting specifications. PCB footprints and assembly processes remain unchanged between the two part numbers.